AutoCodes – Jeep – B1225 Jeep

B1225 Jeep Code - Rear Wiper Indicator Control Circuit Low

Quick Answer

The Instrument Cluster monitors the Rear Wiper Indicator. Common causes include Faulty Switch Back, Switch Back harness is open or shorted, Switch Back circuit poor electrical connection. Severity is Low - monitor the vehicle and repair when practical. The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.

What it means: B1225 Jeep indicates Rear Wiper Indicator Control Circuit Low.
Common causes: Common causes include Faulty Switch Back, Switch Back harness is open or shorted, Switch Back circuit poor electrical connection.
Severity: Low - monitor the vehicle and repair when practical.
Can I drive?: The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 1,218

How popular is this code, among other codes? Low

Repair Importance Level

Low (Monitor) (1 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Nov 19, 2024

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B1225 Jeep Description

The Instrument Cluster monitors the Rear Wiper Indicator. The Instrument Cluster sets the OBDII code when the Rear Wiper Indicator is not to factory specifications.

OBDII Code B1225 Jeep - Rear Wiper Indicator Control Circuit Low - AutoCodes.com — B1225 Jeep Code - Rear Wiper Indicator Control Circuit Low

What does this mean?

What are the Possible Causes of the DTC B1225 Jeep?

Faulty Switch Back
Switch Back harness is open or shorted
Switch Back circuit poor electrical connection
Faulty Instrument Cluster

How to Fix the DTC B1225 Jeep?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B1225 Jeep code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B1225 Jeep code?

Need more information on how to fix the B1225 Jeep code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B1225 Jeep code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B1225 Jeep Code

1. What are the common symptoms of OBDII code B1225 in a Jeep related to the Rear Wiper Indicator Control Circuit Low?

- The common symptoms include the rear wiper not working, the rear wiper indicator light staying on constantly, or erratic behavior of the rear wiper.

2. What are the possible causes of OBDII code B1225 in a Jeep indicating a Rear Wiper Indicator Control Circuit Low?

- The code can be triggered by issues such as a faulty rear wiper motor, damaged wiring in the rear wiper circuit, or a defective rear wiper switch.

3. How can I diagnose OBDII code B1225 in a Jeep for the Rear Wiper Indicator Control Circuit Low?

- Diagnosis involves checking the rear wiper motor, inspecting the wiring for damage, and testing the rear wiper switch for proper functionality using a multimeter.

4. Can a DIY enthusiast repair OBDII code B1225 in a Jeep related to the Rear Wiper Indicator Control Circuit Low?

- Yes, some repairs like replacing the rear wiper motor or repairing damaged wiring can be done by a DIY enthusiast with the right tools and knowledge.

5. Are there any quick tips for fixing OBDII code B1225 in a Jeep for the Rear Wiper Indicator Control Circuit Low?

- Quick tips include checking the rear wiper fuse, ensuring the rear wiper arm is not stuck, and inspecting the rear wiper wiring harness for any visible damage.

6. Is it safe to continue driving with OBDII code B1225 indicating a Rear Wiper Indicator Control Circuit Low in a Jeep?

- It is not recommended to drive with this issue as it can lead to reduced visibility due to the malfunctioning rear wiper, especially in adverse weather conditions.

7. How much does it typically cost to repair OBDII code B1225 in a Jeep related to the Rear Wiper Indicator Control Circuit Low?

- The cost of repair can vary depending on the exact cause of the issue but may range from $100 to $300 for parts and labor.

8. Can a faulty rear wiper motor cause OBDII code B1225 to appear in a Jeep?

- Yes, a faulty rear wiper motor can cause the Rear Wiper Indicator Control Circuit to show low voltage, triggering OBDII code B1225 in a Jeep.

9. Will resetting the OBDII system clear the B1225 code related to the Rear Wiper Indicator Control Circuit Low in a Jeep?

- Resetting the system may temporarily clear the code, but if the underlying issue is not fixed, the code is likely to reappear upon driving.

10. How important is it to address OBDII code B1225 in a Jeep indicating a Rear Wiper Indicator Control Circuit Low promptly?

- It is important to address this code promptly to ensure the proper functioning of the rear wiper system, which is crucial for visibility and safety while driving.