B1225 Chrysler Code - Rear Wiper Indicator Control Circuit Low
Quick Answer
The Instrument Cluster monitors the Rear Wiper Indicator. Common causes include Faulty Switch Back, Switch Back harness is open or shorted, Switch Back circuit poor electrical connection. Severity is Low - monitor the vehicle and repair when practical. The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.
- What it means
- B1225 Chrysler indicates Rear Wiper Indicator Control Circuit Low.
- Common causes
- Common causes include Faulty Switch Back, Switch Back harness is open or shorted, Switch Back circuit poor electrical connection.
- Severity
- Low - monitor the vehicle and repair when practical.
- Can I drive?
- The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.
Code B1225 Chrysler Description
What are the Possible Causes of the DTC B1225 Chrysler?
- Faulty Switch Back
- Switch Back harness is open or shorted
- Switch Back circuit poor electrical connection
- Faulty Instrument Cluster
How to Fix the DTC B1225 Chrysler?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B1225 Chrysler code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B1225 Chrysler code?
Need more information on how to fix the B1225 Chrysler code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1225 Chrysler code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B1225 Chrysler Code
1. What are the common symptoms of OBDII code B1225 for a Chrysler rear wiper indicator control circuit low?
The common symptoms include the rear wiper not functioning properly, the rear wiper indicator light staying on, or intermittent operation of the rear wiper.
2. What are the possible causes of OBDII code B1225 in a Chrysler vehicle?
Possible causes of code B1225 include a faulty rear wiper motor, a defective rear wiper switch, damaged wiring or connectors in the rear wiper circuit, or a malfunctioning control module.
3. How can I diagnose the OBDII code B1225 in my Chrysler for the rear wiper indicator control circuit low?
You can diagnose the code by inspecting the rear wiper motor, checking the wiring and connectors for any damage or corrosion, testing the rear wiper switch, and using a scan tool to read the code and clear it for further testing.
4. What are some repair tips for fixing OBDII code B1225 in a Chrysler rear wiper indicator control circuit low?
Repair tips include checking and repairing any damaged wiring or connectors, replacing the rear wiper motor if faulty, testing and replacing the rear wiper switch if needed, and resetting the control module after repairs are made.
5. Can I continue driving my Chrysler with OBDII code B1225 related to the rear wiper indicator control circuit low?
It is not recommended to continue driving the vehicle with this code unresolved, as it may lead to further issues with the rear wiper system and affect visibility while driving in adverse weather conditions.
6. How much does it typically cost to repair OBDII code B1225 in a Chrysler for the rear wiper indicator control circuit low?
The cost of repair can vary depending on the exact cause of the issue. It could range from a simple fix like repairing a damaged wire or connector to a more expensive repair like replacing the rear wiper motor or control module.
7. Can OBDII code B1225 in a Chrysler be triggered by a loose connection in the rear wiper system?
Yes, a loose connection in the rear wiper system can cause the control circuit to register as low, triggering OBDII code B1225. It is important to check all connections during diagnosis.
8. Is it possible to reset the OBDII code B1225 in a Chrysler for the rear wiper indicator control circuit low without fixing the underlying issue?
While you can clear the code using a scan tool, it is not recommended to reset the code without addressing the root cause, as the issue may persist and lead to further problems with the rear wiper system.
9. What steps should I take if I encounter OBDII code B1225 intermittently in my Chrysler for the rear wiper indicator control circuit low?
If the code appears intermittently, it is crucial to perform a thorough inspection of the rear wiper system, including the motor, switch, wiring, and connectors, to identify and address any potential issues causing the intermittent fault.
10. Are there any common DIY fixes for resolving OBDII code B1225 in a Chrysler related to the rear wiper indicator control circuit low?
Some common DIY fixes include checking and tightening loose connections, inspecting and repairing damaged wiring, and cleaning the rear wiper system components to ensure proper functionality. However, more complex issues may require professional diagnosis and repair.
Discuss the causes and fixes for B1225 Chrysler OBDII Code
Code B1225 Chrysler comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
