B11D6 FORD - Driver Display Alert LED
B11D6 FORD Possible Causes
- Faulty Driver Display Alert LED
- Driver Display Alert LED harness is open or shorted
- Driver Display Alert LED circuit poor electrical connection
How do I fix code B11D6 FORDCheck the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.
B11D6:15 Driver Display Alert LED: Circuit Short To Battery or open
Cost of diagnosing the B11D6 FORD code
Labor: 1.0The cost of diagnosing the B11D6 FORD code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle's make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
- Engine Light ON (or Service Engine Soon Warning Light)
B11d6 Ford DescriptionOn each ignition cycle, the Side Obstacle Detection Control Module - Right (SOD-R) and Side Obstacle Detection Control Module - Left (SOD-L) run a self diagnostic check during which the exterior mirror Blind Spot Information System (BLIS™)/Cross Traffic Alert (CTA) LEDs illuminate for 3 seconds then turn off indicating the system is operational. If a Diagnostic Trouble Code (DTC) fault is present, a system fault message is observed in the Instrument Panel Cluster (IPC) message center. The OBDII code sets when the SOD-R or SOD-L detects an open, short to ground or battery voltage on the exterior mirror BLIS™ /CTA LED supply circuit.
B11D6 FORD More InformationNeed more information on how to fix the B11D6 FORD code?
Get Access to Factory Service Manuals
Need more help?Get the B11d6 Ford code diagnosed by a professional: Find a repair shop in your area
CommentsHelp us improve AutoCodes.com. Leave a comment below or tell us if the information above help you fix the code. What are the symptoms on your vehicle for the B11d6 Ford code? Have you replaced any parts?
Any information is appreciated. Thanks