B11CC DODGE - Main/Left Temperature Door Travel Too Small
- Driver Blend Door Binding
- Faulty Driver Blend Door Actuator
- Driver Blend Door Actuator harness is open or shorted
- Driver Blend Door Actuator circuit poor electrical connection
- Faulty A/C Heater Module
- Engine Light ON (or Service Engine Soon Warning Light)
B11cc Dodge DescriptionAfter the initial installation of the A/C Heater Module, the controller is calibrated to each individual blend/mode door actuator. These calibrations are stored as in the number of pulses it takes to move the door from one stop to another. The A/C Heater Module drives the Door Actuators by the use of Door Driver circuit and a Common Door Driver circuit and monitors all door actuator pulses to detect door movement in both directions. Most of the door actuators share a common door driver circuit but each door actuator has its own unique driver circuit. Due to shared circuitry, similar Diagnostic Trouble Codes (DTCs) can set at the same time for multiple actuators depending upon the type of circuit malfunction, its location, and the direction the actuator is moving when the malfunction is present. For further information.
Need more help?Get the B11cc Dodge code diagnosed by a professional: Find a repair shop in your area
B11CC DODGE CommentsHelp us improve AutoCodes.com. Leave a comment below or tell us if the information above help you fix the code. What are the symptoms on your vehicle for the B11cc Dodge code? Have you replaced any parts?
Any information is appreciated. Thanks