AutoCodes – Chrysler – B11CC Chrysler

B11CC Chrysler Code - Main/Left Temperature Door Travel Too Small

Quick Answer

After the initial installation of the A/C Heater Module, the controller is calibrated to each individual blend/mode door actuator. Common causes include Driver Blend Door Binding, Faulty Driver Blend Door Actuator, Driver Blend Door Actuator harness is open or shorted. Severity is Low - monitor the vehicle and repair when practical. The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.

What it means: B11CC Chrysler indicates Main/Left Temperature Door Travel Too Small.
Common causes: Common causes include Driver Blend Door Binding, Faulty Driver Blend Door Actuator, Driver Blend Door Actuator harness is open or shorted.
Severity: Low - monitor the vehicle and repair when practical.
Can I drive?: The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 1,632

How popular is this code, among other codes? Low

Repair Importance Level

Low (Monitor) (1 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Nov 19, 2024

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B11CC Chrysler Description

After the initial installation of the A/C Heater Module, the controller is calibrated to each individual blend/mode door actuator. These calibrations are stored as in the number of pulses it takes to move the door from one stop to another. The A/C Heater Module drives the Door Actuators by the use of Door Driver circuit and a Common Door Driver circuit and monitors all door actuator pulses to detect door movement in both directions. Most of the door actuators share a common door driver circuit but each door actuator has its own unique driver circuit. Due to shared circuitry, similar Diagnostic Trouble Codes (DTCs) can set at the same time for multiple actuators depending upon the type of circuit malfunction, its location, and the direction the actuator is moving when the malfunction is present. For further information.

OBDII Code B11CC Chrysler - Main/Left Temperature Door Travel Too Small - AutoCodes.com — B11CC Chrysler Code - Main/Left Temperature Door Travel Too Small

What does this mean?

What are the Possible Causes of the DTC B11CC Chrysler?

Driver Blend Door Binding
Faulty Driver Blend Door Actuator
Driver Blend Door Actuator harness is open or shorted
Driver Blend Door Actuator circuit poor electrical connection
Faulty A/C Heater Module

How to Fix the DTC B11CC Chrysler?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B11CC Chrysler code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B11CC Chrysler code?

Need more information on how to fix the B11CC Chrysler code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B11CC Chrysler code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B11CC Chrysler Code

1. What are the common symptoms of OBDII code B11CC in a Chrysler related to the Main/Left Temperature Door Travel Too Small?

- Common symptoms include inconsistent temperature control on the driver's side, the inability to adjust the temperature properly, or only hot air blowing from the vents.

2. What are the possible causes of the Main/Left Temperature Door Travel Too Small OBDII code in a Chrysler?

- The code B11CC may be triggered by a malfunctioning blend door actuator, a faulty temperature sensor, a broken blend door, or wiring issues.

3. How can I diagnose the Main/Left Temperature Door Travel Too Small issue in my Chrysler?

- Diagnose the problem by checking the blend door actuator operation, testing the temperature sensors, inspecting the blend door for any obstructions or damage, and scanning for related fault codes.

4. Will driving with the B11CC code related to the Main/Left Temperature Door Travel Too Small cause any further damage to my Chrysler?

- Driving with this code may not cause immediate damage, but it can lead to discomfort due to improper temperature regulation and potentially strain the HVAC system components over time.

5. Can I repair the Main/Left Temperature Door Travel Too Small issue in my Chrysler on my own?

- Depending on the exact cause, DIY repairs may be possible for mechanically inclined individuals. However, complex issues like blend door replacement or HVAC system calibration may require professional assistance.

6. How much does it typically cost to repair the OBDII code B11CC in a Chrysler pertaining to the Main/Left Temperature Door Travel Too Small?

- Repair costs can vary widely based on the specific problem, parts needed, and labor rates. It's advisable to obtain estimates from reputable mechanics or service centers.

7. Are there any temporary fixes or workarounds for the Main/Left Temperature Door Travel Too Small issue in a Chrysler?

- While temporary fixes like manually adjusting the temperature or resetting the HVAC system may provide short-term relief, addressing the root cause is necessary for a permanent solution.

8. Can extreme weather conditions affect the occurrence of the B11CC code related to the Main/Left Temperature Door Travel Too Small in a Chrysler?

- Yes, extreme temperatures can exacerbate issues with the HVAC system, including problems related to temperature regulation and blend door operation.

9. Is it safe to continue driving my Chrysler with the Main/Left Temperature Door Travel Too Small issue if the check engine light is not illuminated?

- While it may be safe to drive without immediate risks, it's best to address the underlying problem to ensure proper functionality of the HVAC system and avoid potential discomfort while driving.

10. How often should I have the HVAC system in my Chrysler inspected to prevent issues like the Main/Left Temperature Door Travel Too Small error code?

- Regular maintenance and inspections, especially before extreme weather seasons, can help prevent issues like the B11CC code and ensure optimal performance of the HVAC system in your Chrysler.