B11CA Chrysler Code - Right Temperature Door Travel Too Large
Quick Answer
After the initial installation of the A/C Heater Module, the controller is calibrated to each individual blend/mode door actuator. Common causes include Passenger Blend Door Binding, Faulty Passenger Blend Door Actuator, Passenger Blend Door Actuator harness is open or shorted. Severity is Low - monitor the vehicle and repair when practical. The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.
- What it means
- B11CA Chrysler indicates Right Temperature Door Travel Too Large.
- Common causes
- Common causes include Passenger Blend Door Binding, Faulty Passenger Blend Door Actuator, Passenger Blend Door Actuator harness is open or shorted.
- Severity
- Low - monitor the vehicle and repair when practical.
- Can I drive?
- The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.
Code B11CA Chrysler Description
What are the Possible Causes of the DTC B11CA Chrysler?
- Passenger Blend Door Binding
- Faulty Passenger Blend Door Actuator
- Passenger Blend Door Actuator harness is open or shorted
- Passenger Blend Door Actuator circuit poor electrical connection
- Faulty A/C Heater Module
How to Fix the DTC B11CA Chrysler?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B11CA Chrysler code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B11CA Chrysler code?
Need more information on how to fix the B11CA Chrysler code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B11CA Chrysler code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B11CA Chrysler Code
1. What does the OBDII code B11CA mean on a Chrysler vehicle?
The code B11CA indicates that the right temperature door in the HVAC system has traveled beyond its expected range or limits.
2. What are the common symptoms of a B11CA code?
Common symptoms include inconsistent cabin temperatures, lack of control over the passenger side temperature, and unusual noises from the HVAC system.
3. What causes the B11CA code to appear?
This code is typically caused by a faulty right temperature door actuator, a misaligned or broken temperature door, or debris obstructing the door’s movement.
4. Can I still drive my vehicle with a B11CA code?
Yes, you can still drive the vehicle, but you may experience issues with the HVAC system, such as uneven or unreliable heating and cooling.
5. How do I diagnose the B11CA code?
Diagnose the code by using an OBDII scanner to confirm the fault, inspecting the right temperature door actuator, checking for obstructions, and verifying the door’s alignment and range of motion.
6. What repairs are needed to fix the B11CA code?
Repairs may include replacing the right temperature door actuator, realigning the door, or removing any obstructions in the HVAC system.
7. How much does it cost to fix the B11CA code on a Chrysler?
The repair cost can vary, but actuator replacement typically ranges from $150 to $300, depending on labor rates and parts availability.
8. Can I fix the B11CA code myself?
If you’re comfortable working on HVAC components and have basic tools, you can attempt to inspect and replace the actuator or clear obstructions yourself. Otherwise, it’s best to consult a professional.
9. Will clearing the B11CA code with a scanner solve the issue?
Clearing the code with a scanner may temporarily reset the warning, but the underlying issue must be addressed to prevent the code from returning.
10. Can a failing HVAC control module trigger the B11CA code?
While rare, a malfunctioning HVAC control module could potentially contribute to the issue if it’s not sending proper signals to the actuator.
Discuss the causes and fixes for B11CA Chrysler OBDII Code
Code B11CA Chrysler comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
