AutoCodes.com
Login with Google
AutoCodes – Generic – B11C8

B11C8 Code - Right Temperature Door Circuit

Quick Answer

After the initial installation of the A/C Heater Module, the controller is calibrated to each individual blend/mode door actuator. Common causes include Passenger Blend Door Binding, Faulty Passenger Blend Door Actuator, Passenger Blend Door Actuator harness is open or shorted. Severity is Low - monitor the vehicle and repair when practical. The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.

What it means
B11C8 indicates Right Temperature Door Circuit.
Common causes
Common causes include Passenger Blend Door Binding, Faulty Passenger Blend Door Actuator, Passenger Blend Door Actuator harness is open or shorted.
Severity
Low - monitor the vehicle and repair when practical.
Can I drive?
The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.
Save to My Repairs My Repairs
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 2,007
How popular is this code, among other codes? Low
What is this?
Table of contents Created and updated by William Orellana on Nov 19, 2024
💬 Need more help? Ask Coddy for instant answers — it's free!

Code B11C8 Description

After the initial installation of the A/C Heater Module, the controller is calibrated to each individual blend/mode door actuator. These calibrations are stored as in the number of pulses it takes to move the door from one stop to another. The A/C Heater Module drives the Door Actuators by the use of Door Driver circuit and a Common Door Driver circuit and monitors all door actuator pulses to detect door movement in both directions. Most of the door actuators share a common door driver circuit but each door actuator has its own unique driver circuit. Due to shared circuitry, similar Diagnostic Trouble Codes (DTCs) can set at the same time for multiple actuators depending upon the type of circuit malfunction, its location, and the direction the actuator is moving when the malfunction is present. For further information
OBDII Code B11C8 - Right Temperature Door Circuit - AutoCodes.com
B11C8 Code - Right Temperature Door Circuit
What does this mean?

What are the Possible Causes of the DTC B11C8?

  • Passenger Blend Door Binding
  • Faulty Passenger Blend Door Actuator
  • Passenger Blend Door Actuator harness is open or shorted
  • Passenger Blend Door Actuator circuit poor electrical connection
  • Faulty A/C Heater Module

How to Fix the DTC B11C8?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

B11C8-11-RIGHT TEMPERATURE DOOR CONTROL - CIRCUIT SHORT TO GROUND
B11C8-12-RIGHT TEMPERATURE DOOR CONTROL - CIRCUIT SHORT TO BATTERY
B11C8-13-RIGHT TEMPERATURE DOOR CONTROL - CIRCUIT OPEN
B11C8-92-RIGHT TEMPERATURE DOOR CONTROL - PERFORMANCE OR INCORRECT OPERATION

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B11C8 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B11C8 code?

Need more information on how to fix the B11C8 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B11C8 code diagnosed by a professional: Find a repair shop in your area

Information for Specific Makes

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B11C8 Code

1. What does the OBDII code B11C8 mean?

B11C8 indicates an issue with the right temperature door circuit, which controls airflow temperature on the passenger side of the vehicle.

2. What are the symptoms of code B11C8?

Common symptoms include inconsistent cabin temperature, inability to adjust passenger-side temperature, or clicking noises from the HVAC system.

3. What causes the B11C8 code to appear?

The code is typically caused by a faulty right temperature door actuator, wiring issues, a blown fuse, or a malfunctioning HVAC control module.

4. Can I drive with the B11C8 code present?

Yes, you can drive with this code, but you may experience discomfort due to improper temperature regulation on the passenger side.

5. How do I diagnose the B11C8 code?

Start by inspecting the right temperature door actuator, checking for damaged wiring or connectors, and testing the actuator's electrical signals with a multimeter.

6. How is the B11C8 code repaired?

Repairs may involve replacing the right temperature door actuator, repairing damaged wiring, or recalibrating the HVAC system.

7. How much does it cost to fix the B11C8 code?

Repair costs can vary, but replacing the actuator generally costs between $150 and $300, including parts and labor.

8. Can a software issue cause the B11C8 code?

Yes, a malfunctioning or outdated HVAC control module software can potentially trigger this code.

9. Do I need to recalibrate the HVAC system after repairing the B11C8 code?

Yes, recalibration is often necessary to ensure the HVAC system properly recognizes and controls the new or repaired actuator.

10. Can clearing the B11C8 code solve the problem?

Clearing the code may temporarily reset the system, but if the underlying issue isn’t fixed, the code will likely return.

Discuss the causes and fixes for B11C8 OBDII Code

Submit a New Comment

Code B11C8 comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play