AutoCodes – Mercury – B119F Mercury

B119F Mercury Code - GPS Antenna

Quick Answer

The Global Positioning System (GPS) antenna provides information from the GPS satellite system to the Audio Control Module (ACM). Common causes include Faulty GPS Antenna, GPS Antenna harness is open or shorted, GPS Antenna circuit poor electrical connection. Severity is Low - monitor the vehicle and repair when practical. The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.

What it means: B119F Mercury indicates GPS Antenna.
Common causes: Common causes include Faulty GPS Antenna, GPS Antenna harness is open or shorted, GPS Antenna circuit poor electrical connection.
Severity: Low - monitor the vehicle and repair when practical.
Can I drive?: The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 824

How popular is this code, among other codes? Low

Repair Importance Level

Low (Monitor) (1 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Nov 19, 2024

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B119F Mercury Description

The Global Positioning System (GPS) antenna provides information from the GPS satellite system to the Audio Control Module (ACM). This information is used to calculate position and direction of travel. A splitter is used in the front satellite radio antenna cable to split the signals between the satellite radio and the GPS. It is possible that a concern in the GPS signal line after the splitter may cause a navigation system concern without affecting the satellite radio. The OBDII code sets when any failure is detected in the GPS antenna circuit.

OBDII Code B119F Mercury - GPS Antenna - AutoCodes.com — B119F Mercury Code - GPS Antenna

What does this mean?

What are the Possible Causes of the DTC B119F Mercury?

Faulty GPS Antenna
GPS Antenna harness is open or shorted
GPS Antenna circuit poor electrical connection
Faulty Audio Control Module (ACM)

How to Fix the DTC B119F Mercury?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

DTC B119F:01 GPS Antenna General Electrical Failure
DTC B119F:13 GPS Antenna Circuit Open

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B119F Mercury code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B119F Mercury code?

Need more information on how to fix the B119F Mercury code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B119F Mercury code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B119F Mercury Code

1. What does the OBDII code B119F for a Mercury with GPS Antenna refer to?

The code B119F indicates a fault with the GPS antenna in the vehicle.

2. What are common symptoms of the B119F OBDII code in a Mercury?

Common symptoms include GPS system malfunctions, inaccurate location tracking, and loss of signal.

3. What are possible causes of the B119F OBDII code in a Mercury?

Potential causes of the B119F code include a faulty GPS antenna, damaged wiring, or a malfunctioning GPS module.

4. How can I diagnose the issue causing the B119F OBDII code in my Mercury?

Diagnosing the problem may require checking the GPS antenna connections, inspecting the wiring for damage, and testing the GPS module for functionality.

5. Is it safe to drive my Mercury with the B119F OBDII code?

It is generally safe to drive the vehicle with the B119F code, but you may experience issues with the GPS system's accuracy and functionality.

6. Can I repair the B119F OBDII code issue in my Mercury myself?

Depending on your technical skills, you may be able to repair the issue by checking and fixing the GPS antenna connections or replacing the faulty components.

7. How much does it typically cost to fix the B119F OBDII code in a Mercury?

The cost of repairing the B119F code can vary depending on the specific problem, but it may involve replacing the GPS antenna, fixing wiring issues, or repairing the GPS module.

8. Are there any temporary solutions for the B119F OBDII code in a Mercury?

One temporary solution could be disconnecting and reconnecting the GPS antenna to see if that resolves the issue temporarily.

9. Will the B119F OBDII code cause my Mercury to fail an emissions test?

The B119F code is related to the GPS antenna and should not cause your vehicle to fail an emissions test.

10. How important is it to address the B119F OBDII code in a Mercury promptly?

While the B119F code may not affect the vehicle's drivability, addressing it promptly is recommended to ensure the proper functioning of the GPS system and accurate location tracking.