AutoCodes – Generic – B1194

B1194 Code - Right Side Front Curtain Air Bag Module Voltage Short

Quick Answer

The Air Bag Sensor Unit (Air Bag Control Module) monitors the Right Side Front Curtain Air Bag Module. Common causes include Faulty Right Side Front Curtain Air Bag Module, Right Side Front Curtain Air Bag Module harness is open or shorted, Right Side Front Curtain Air Bag Module circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B1194 indicates Right Side Front Curtain Air Bag Module Voltage Short.
Common causes: Common causes include Faulty Right Side Front Curtain Air Bag Module, Right Side Front Curtain Air Bag Module harness is open or shorted, Right Side Front Curtain Air Bag Module circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 2,354

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Feb 27, 2019

Description
Possible Causes
How To Fix
Cost to Diagnose
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B1194 Description

The Air Bag Sensor Unit (Air Bag Control Module) monitors the Right Side Front Curtain Air Bag Module. The Air Bag Sensor Unit sets the OBDII code when the circuit for the front Right Side Front Curtain Air Bag Module circuit is shorted to some power supply circuits.

OBDII Code B1194 - Right Side Front Curtain Air Bag Module Voltage Short - AutoCodes.com — B1194 Code - Right Side Front Curtain Air Bag Module Voltage Short

What does this mean?

What are the Possible Causes of the DTC B1194?

Faulty Right Side Front Curtain Air Bag Module
Right Side Front Curtain Air Bag Module harness is open or shorted
Right Side Front Curtain Air Bag Module circuit poor electrical connection
Faulty Air Bag Sensor Unit (Air Bag Control Module)

How to Fix the DTC B1194?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B1194 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B1194 code?

Need more information on how to fix the B1194 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B1194 code diagnosed by a professional: Find a repair shop in your area

Information for Specific Makes

B1194 Infiniti — Right Side Front Curtain Air Bag Module Voltage Short
B1194 Nissan — Right Side Front Curtain Air Bag Module Voltage Short

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.