B1193 Mercury Code - Crash Event Storage Full and Locked No Sub Type Information
Quick Answer
The Restraint Control Module (RCM) detected that the vehicle has been in a crash and sets the OBDII code. Common causes include Faulty Restraint Control Module (RCM), Restraint Control Module (RCM) harness is open or shorted, Restraint Control Module (RCM) circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B1193 Mercury indicates Crash Event Storage Full and Locked No Sub Type Information.
- Common causes
- Common causes include Faulty Restraint Control Module (RCM), Restraint Control Module (RCM) harness is open or shorted, Restraint Control Module (RCM) circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B1193 Mercury Description
What are the Possible Causes of the DTC B1193 Mercury?
- Faulty Restraint Control Module (RCM)
- Restraint Control Module (RCM) harness is open or shorted
- Restraint Control Module (RCM) circuit poor electrical connection
How to Fix the DTC B1193 Mercury?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B1193 Mercury code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B1193 Mercury code?
Need more information on how to fix the B1193 Mercury code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1193 Mercury code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B1193 Mercury Code
1. What are the common symptoms of OBDII code B1193 in a Mercury?
- The common symptoms include the airbag warning light staying illuminated on the dashboard and potential issues with the airbag system.
2. What does the OBDII code B1193 "Crash Event Storage Full and Locked No Sub Type Information" mean for a Mercury?
- This code indicates that the crash event data storage in the airbag control module is full and locked, with no sub-type information available.
3. What are the possible causes of OBDII code B1193 in a Mercury?
- The code B1193 can be triggered by a full crash event data storage in the airbag control module, a locked storage preventing new data recording, or a lack of specific sub-type information.
4. How serious is the OBDII code B1193 in a Mercury?
- The B1193 code is quite serious as it pertains to the airbag system, which is a crucial safety component in the vehicle. It is recommended to address this issue promptly.
5. Can I continue driving my Mercury with the OBDII code B1193 present?
- It is not recommended to drive the vehicle with the B1193 code active, as it indicates potential issues with the airbag system that may compromise safety in the event of a crash.
6. How can I repair the OBDII code B1193 in my Mercury?
- Repairing the B1193 code typically involves accessing the airbag control module, diagnosing the specific cause of the issue, clearing the crash event data storage, and addressing any underlying problems.
7. Is it possible to reset the OBDII code B1193 in a Mercury without professional equipment?
- While some basic code readers may be able to clear the code temporarily, it is recommended to have the underlying issue diagnosed and repaired by a qualified mechanic to ensure the airbag system's proper functioning.
8. Are there any safety precautions I should take if the OBDII code B1193 appears in my Mercury?
- It is important to exercise caution and prioritize safety if the B1193 code is present, as it indicates potential issues with the airbag system. Avoid driving the vehicle until the problem is resolved.
9. How much does it typically cost to repair the OBDII code B1193 in a Mercury?
- The cost of repairing the B1193 code can vary depending on the specific cause of the issue, the extent of repairs needed, and the labor rates in your area. It is advisable to obtain a professional diagnosis for an accurate estimate.
10. Can the OBDII code B1193 in a Mercury be a recurring issue even after repair?
- If the underlying cause of the B1193 code is not properly addressed during repair, it is possible for the issue to recur. It is crucial to ensure that all aspects of the airbag system are thoroughly inspected and repaired to prevent recurrence.
Discuss the causes and fixes for B1193 Mercury OBDII Code
Code B1193 Mercury comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
