AutoCodes – Mercury – B1182 Mercury

B1182 Mercury Code - Tire Pressure Monitoring System No Sub Type Information

Quick Answer

The Body Control Module (BCM) monitors the Tire Pressure Sensors. Common causes include Faulty Tire Pressure Sensors, Faulty Body Control Module (BCM). Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.

What it means: B1182 Mercury indicates Tire Pressure Monitoring System No Sub Type Information.
Common causes: Common causes include Faulty Tire Pressure Sensors, Faulty Body Control Module (BCM).
Severity: Moderate - service should be scheduled soon.
Can I drive?: The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 729

How popular is this code, among other codes? Low

Repair Importance Level

Moderate (Service soon) (2 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Nov 19, 2024

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B1182 Mercury Description

The Body Control Module (BCM) monitors the Tire Pressure Sensors. The BCM sets the OBDII code when all 4 of the tire pressure sensors are faulted, not responding or when data is not received by the BCM.

OBDII Code B1182 Mercury - Tire Pressure Monitoring System No Sub Type Information - AutoCodes.com — B1182 Mercury Code - Tire Pressure Monitoring System No Sub Type Information

What does this mean?

What are the Possible Causes of the DTC B1182 Mercury?

Faulty Tire Pressure Sensors
Faulty Body Control Module (BCM)

How to Fix the DTC B1182 Mercury?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B1182 Mercury code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B1182 Mercury code?

Need more information on how to fix the B1182 Mercury code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B1182 Mercury code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B1182 Mercury Code

1. What are the common symptoms of OBDII code B1182 in a Mercury related to the Tire Pressure Monitoring System?

The common symptoms include the TPMS warning light staying illuminated on the dashboard and a message indicating a problem with the tire pressure monitoring system.

2. What could cause the OBDII code B1182 in a Mercury's Tire Pressure Monitoring System?

The code B1182 typically indicates a lack of sub type information being transmitted by one or more tire pressure sensors, which could be due to sensor malfunctions, low sensor battery voltage, or sensor communication issues.

3. How can I diagnose the OBDII code B1182 in my Mercury's TPMS?

Diagnosing the code B1182 involves using an OBDII scanner to read the fault codes, checking each tire pressure sensor for proper functioning, and ensuring that all sensors are transmitting accurate data to the vehicle's computer.

4. Can I reset the OBDII code B1182 related to the TPMS in my Mercury?

Resetting the B1182 code may temporarily clear the warning light, but it is important to address the underlying issue causing the fault code to prevent the TPMS warning from coming back on.

5. Is it safe to drive my Mercury with the OBDII code B1182 related to the TPMS illuminated?

While it may be safe to drive with the code B1182 illuminated, it is important to address the issue promptly to ensure that the TPMS functions properly and alerts you to any actual tire pressure issues.

6. Are there any DIY repair tips for fixing the OBDII code B1182 in a Mercury's TPMS?

DIY repair tips may include checking and replacing the batteries in the tire pressure sensors, ensuring proper sensor placement and communication, and verifying tire pressures are within recommended levels.

7. How much does it typically cost to repair the OBDII code B1182 in a Mercury's Tire Pressure Monitoring System?

The cost of repairing the B1182 code can vary depending on the underlying cause, such as sensor replacements or system recalibration. It is recommended to consult with a mechanic for an accurate estimate.

8. Can extreme weather conditions affect the OBDII code B1182 in a Mercury's TPMS?

Extreme temperatures or weather conditions can potentially impact tire pressure sensor performance, leading to issues that trigger the B1182 fault code. Monitoring tire pressure regularly is essential in such conditions.

9. Will ignoring the OBDII code B1182 related to the TPMS affect other systems in my Mercury?

Ignoring the B1182 code may not directly affect other systems, but it can compromise the accuracy of the TPMS, potentially leading to unsafe driving conditions if tire pressure issues go undetected.

10. How often should I have the TPMS system checked in my Mercury to prevent the OBDII code B1182 from appearing?

Regular maintenance checks, such as during routine service appointments or tire rotations, can help prevent issues that trigger the B1182 code. Monitoring tire pressure and addressing any abnormalities promptly can also help prevent the code from appearing.