AutoCodesNissan – B1177 Nissan

B1177 Nissan Code - Right Front Seat Belt Buckle Pre-Tensioner Open

Quick Answer

The Air Bag Sensor Unit (Air Bag Control Module) monitors the Right Side Front Seat Belt Buckle Pre-Tensioner. Common causes include Faulty Right Front Seat Belt Buckle Pre-Tensioner, Right Front Seat Belt Buckle Pre-Tensioner harness is open or shorted, Right Front Seat Belt Buckle Pre-Tensioner circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
B1177 Nissan indicates Right Front Seat Belt Buckle Pre-Tensioner Open.
Common causes
Common causes include Faulty Right Front Seat Belt Buckle Pre-Tensioner, Right Front Seat Belt Buckle Pre-Tensioner harness is open or shorted, Right Front Seat Belt Buckle Pre-Tensioner circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 9,982
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Nov 19, 2024
💬 Need more help? Ask Coddy for instant answers — it's free!

Code B1177 Nissan Description

The Air Bag Sensor Unit (Air Bag Control Module) monitors the Right Side Front Seat Belt Buckle Pre-Tensioner. The Air Bag Sensor Unit sets the OBDII code when the circuit for front Right Front Seat Belt Buckle Pre-Tensioner is open.
OBDII Code B1177 Nissan - Right Front Seat Belt Buckle Pre-Tensioner Open - AutoCodes.com
B1177 Nissan Code - Right Front Seat Belt Buckle Pre-Tensioner Open

What are the Possible Causes of the DTC B1177 Nissan?

  • Faulty Right Front Seat Belt Buckle Pre-Tensioner
  • Right Front Seat Belt Buckle Pre-Tensioner harness is open or shorted
  • Right Front Seat Belt Buckle Pre-Tensioner circuit poor electrical connection
  • Faulty Air Bag Sensor Unit (Air Bag Control Module)

How to Fix the DTC B1177 Nissan?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B1177 Nissan code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B1177 Nissan code?

Need more information on how to fix the B1177 Nissan code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B1177 Nissan code diagnosed by a professional: Find a repair shop in your area

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

  • Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
  • Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
  • Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
  • Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B1177 Nissan Code

1. What does the OBDII code B1177 mean on a Nissan?

B1177 indicates an issue with the right front seat belt buckle pre-tensioner circuit, specifically an "open" condition, meaning there is a break or disconnection in the circuit.

2. What are the symptoms of the B1177 code in a Nissan?

Common symptoms include the airbag warning light illuminating on the dashboard and the potential failure of the seat belt pre-tensioner to deploy properly in the event of an accident.

3. What causes the B1177 code to appear in a Nissan?

Typical causes include a damaged or disconnected wiring harness, a faulty seat belt pre-tensioner, or corroded electrical connectors within the system.

4. Can I drive my Nissan with the B1177 code active?

While the vehicle may still be drivable, it is not safe, as the seat belt pre-tensioner and possibly the airbag system may not function correctly in a collision.

5. How do I diagnose the B1177 code on a Nissan?

Diagnosis typically involves using an OBDII scanner to confirm the code, inspecting the wiring and connectors to the right front seat belt pre-tensioner, and testing the pre-tensioner for continuity or faults.

6. How do I fix the B1177 code on a Nissan?

Repairs may include reconnecting or replacing damaged wiring, cleaning corroded connectors, or replacing the faulty seat belt pre-tensioner assembly.

7. What tools are needed to troubleshoot the B1177 code on a Nissan?

You’ll need an OBDII scanner, a multimeter to check electrical circuits, and potentially basic tools to access and inspect the seat belt system components.

8. Is the B1177 code related to the airbag system in my Nissan?

Yes, the seat belt pre-tensioner is part of the vehicle’s Supplemental Restraint System (SRS), and issues with this component can affect the airbag system’s functionality.

9. Can a weak battery cause the B1177 code in a Nissan?

While uncommon, a weak or failing battery can sometimes result in electrical issues that trigger error codes, including B1177.

10. Do I need to reset the code after fixing the B1177 issue on a Nissan?

Yes, after repairs, use an OBDII scanner to clear the code. If the issue is resolved, the code should not return.

Discuss the causes and fixes for B1177 Nissan OBDII Code

Code B1177 Nissan comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play