B1163 FORD - Left Power Running Board Hall-Effect Sensor Failure
B1163 FORD Possible Causes
- Faulty Power Running Board Motor Assembly
- Power Running Board Motor Assembly harness is open or shorted
- Power Running Board Motor Assembly circuit poor electrical connection
- Faulty Power Running Board (PRB) Module
How do I fix code B1163 FORDCheck the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.
Cost of diagnosing the B1163 FORD code
Labor: 1.0The cost of diagnosing the B1163 FORD code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle's make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
- Engine Light ON (or Service Engine Soon Warning Light)
B1163 Ford DescriptionThe Power Running Board (PRB) module provides a regulated 10-volt power supply to the Hall-effect sensor (internal to the PRB motor) through the circuit. The Hall-effect ground is provided by the PRB module through the circuit. The PRB module monitors the PRB Hall-effect signal through the circuit. If the PRB module does not receive any signal from the Hall-effect sensor during operation, the PRB will stop. The PRB module sets this Diagnostic Trouble Code (DTC) if it does not see any feedback from the Hall-Effect sensor during the stowing/deploying of the LH running board.
B1163 FORD More InformationNeed more information on how to fix the B1163 FORD code?
Get Access to Factory Service Manuals
Need more help?Get the B1163 Ford code diagnosed by a professional: Find a repair shop in your area
CommentsHelp us improve AutoCodes.com. Leave a comment below or tell us if the information above help you fix the code. What are the symptoms on your vehicle for the B1163 Ford code? Have you replaced any parts?
Any information is appreciated. Thanks