B1152 Honda Code - Gauge Control Module EEPROM Error
Quick Answer
The Multiplex Integrated Control Unit (MICU) monitors the Gauge Control Module. Common causes include Faulty Gauge Control Module, Gauge Control Module harness is open or shorted, Gauge Control Module circuit poor electrical connection. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
- What it means
- B1152 Honda indicates Gauge Control Module EEPROM Error.
- Common causes
- Common causes include Faulty Gauge Control Module, Gauge Control Module harness is open or shorted, Gauge Control Module circuit poor electrical connection.
- Severity
- Moderate - service should be scheduled soon.
- Can I drive?
- The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
Code B1152 Honda Description
What are the Possible Causes of the DTC B1152 Honda?
- Faulty Gauge Control Module
- Gauge Control Module harness is open or shorted
- Gauge Control Module circuit poor electrical connection
- Faulty Multiplex Integrated Control Unit (MICU)
How to Fix the DTC B1152 Honda?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B1152 Honda code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B1152 Honda code?
Need more information on how to fix the B1152 Honda code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1152 Honda code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B1152 Honda Code
1. What are the common symptoms of OBDII code B1152 in a Honda, indicating a Gauge Control Module EEPROM Error?
The common symptoms include malfunctioning gauges on the instrument cluster, such as the speedometer, tachometer, fuel gauge, or temperature gauge.
2. What typically causes the OBDII code B1152 in a Honda related to the Gauge Control Module EEPROM Error?
The code is commonly triggered by a fault in the EEPROM (Electrically Erasable Programmable Read-Only Memory) within the gauge control module, often due to internal corruption or a communication issue.
3. How can I diagnose the Gauge Control Module EEPROM Error in my Honda when OBDII code B1152 is present?
Diagnosis typically involves using a professional OBDII scanner to retrieve the specific code, followed by inspecting the gauge cluster and associated wiring for any visible damage or loose connections.
4. Can the Gauge Control Module EEPROM Error (B1152) in a Honda be repaired, or is module replacement necessary?
In some cases, the EEPROM error can be repaired by reprogramming or replacing the corrupted data within the gauge control module. However, if the issue persists, module replacement may be required.
5. Are there any DIY repair tips for addressing the Gauge Control Module EEPROM Error in a Honda displaying OBDII code B1152?
DIY repair is not recommended for this specific issue due to the complexity of reprogramming EEPROM data and potential risks of damaging the gauge control module. Professional assistance is advised.
6. How critical is it to address the Gauge Control Module EEPROM Error (B1152) in a Honda promptly?
While the vehicle may still be operable with the error present, ignoring the issue can lead to inaccurate gauge readings or complete failure of the instrument cluster, affecting the overall functionality and safety of the vehicle.
7. Can resetting the OBDII code B1152 related to the Gauge Control Module EEPROM Error temporarily resolve the issue in a Honda?
Resetting the code may temporarily clear the error message, but it is likely to reappear if the underlying issue with the EEPROM in the gauge control module is not addressed.
8. Is the Gauge Control Module EEPROM Error (B1152) a common issue in Honda vehicles, or is it specific to certain models or years?
The error can occur in various Honda models and years, particularly those equipped with electronic instrument clusters and gauge control modules with EEPROM technology.
9. What is the typical cost range for professional repair or replacement of the Gauge Control Module EEPROM causing the B1152 error in a Honda?
The cost of repair or replacement can vary depending on the extent of the damage, the specific model of the vehicle, and the labor rates of the service provider, but it can range from a few hundred to over a thousand dollars.
10. Are there any preventive maintenance measures that Honda owners can take to reduce the likelihood of encountering the Gauge Control Module EEPROM Error (B1152)?
Regularly inspecting the instrument cluster for any unusual behavior, addressing electrical issues promptly, and following the manufacturer's recommended maintenance schedule can help prevent potential EEPROM errors in the gauge control module.
Discuss the causes and fixes for B1152 Honda OBDII Code
Code B1152 Honda comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
