AutoCodes – Acura – B1152 Acura

B1152 Acura Code - Gauge Control Module EEPROM Error

Quick Answer

The Multiplex Integrated Control Unit (MICU) monitors the Gauge Control Module. Common causes include Faulty Gauge Control Module, Gauge Control Module harness is open or shorted, Gauge Control Module circuit poor electrical connection. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.

What it means: B1152 Acura indicates Gauge Control Module EEPROM Error.
Common causes: Common causes include Faulty Gauge Control Module, Gauge Control Module harness is open or shorted, Gauge Control Module circuit poor electrical connection.
Severity: Moderate - service should be scheduled soon.
Can I drive?: The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 2,676

How popular is this code, among other codes? Low

Repair Importance Level

Moderate (Service soon) (2 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Nov 19, 2024

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B1152 Acura Description

The Multiplex Integrated Control Unit (MICU) monitors the Gauge Control Module. The MICU sets the OBDII code when the Gauge Control Module is not to factory specifications.

OBDII Code B1152 Acura - Gauge Control Module EEPROM Error - AutoCodes.com — B1152 Acura Code - Gauge Control Module EEPROM Error

What does this mean?

What are the Possible Causes of the DTC B1152 Acura?

Faulty Gauge Control Module
Gauge Control Module harness is open or shorted
Gauge Control Module circuit poor electrical connection
Faulty Multiplex Integrated Control Unit (MICU)

How to Fix the DTC B1152 Acura?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B1152 Acura code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B1152 Acura code?

Need more information on how to fix the B1152 Acura code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B1152 Acura code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B1152 Acura Code

1. What are the common symptoms of OBDII code B1152 in an Acura related to the Gauge Control Module EEPROM Error?

The common symptoms include malfunctioning gauge cluster, inaccurate readings on the instrument panel, and dashboard warning lights illuminating unexpectedly.

2. What are the possible causes of the Gauge Control Module EEPROM Error (B1152) in an Acura?

The error code B1152 can be triggered by a faulty gauge control module, a problem with the EEPROM (Electrically Erasable Programmable Read-Only Memory) in the module, or issues with the wiring/connectors.

3. How can I diagnose the Gauge Control Module EEPROM Error (B1152) in my Acura?

Diagnosing the B1152 code typically involves using an OBDII scanner to retrieve the specific error code, checking the connections to the gauge control module, and testing the module for proper functioning.

4. Can I drive my Acura with the Gauge Control Module EEPROM Error (B1152) without causing further damage?

While it may be possible to drive the vehicle with this error, it is recommended to address the issue promptly to avoid potential inaccuracies in gauge readings or further electrical system problems.

5. Is it possible to reset the Gauge Control Module EEPROM Error (B1152) code in my Acura?

Resetting the B1152 code can be done using an OBDII scanner by clearing the error code after diagnosing and fixing the underlying issue causing the EEPROM error.

6. What are some repair tips for fixing the Gauge Control Module EEPROM Error (B1152) in an Acura?

Repair tips include inspecting and repairing any damaged wiring or connectors, replacing the faulty gauge control module if necessary, and ensuring proper reprogramming of the EEPROM.

7. Can a DIY enthusiast fix the Gauge Control Module EEPROM Error (B1152) in an Acura?

While some simple checks and repairs can be done by DIY enthusiasts, diagnosing and repairing the EEPROM error may require specialized tools or expertise, so it is recommended to consult a professional mechanic.

8. How much does it typically cost to repair the Gauge Control Module EEPROM Error (B1152) in an Acura?

The cost of repairing the B1152 error code can vary depending on the extent of the issue, parts needed for replacement, and labor costs. It is advisable to obtain quotes from multiple repair shops for a more accurate estimate.

9. Are there any recalls or technical service bulletins related to the Gauge Control Module EEPROM Error (B1152) in Acura vehicles?

It's recommended to check with authorized Acura service centers or visit the National Highway Traffic Safety Administration (NHTSA) website to see if there are any recalls or technical service bulletins related to this specific error code.

10. How can I prevent the Gauge Control Module EEPROM Error (B1152) from occurring in my Acura in the future?

Regular maintenance checks, timely repairs of any electrical issues, and following the manufacturer's recommended service schedule can help prevent the occurrence of the B1152 error in your Acura.