B1142 FORD - Ignition Status 1 Signal Invalid
B1142 FORD Possible Causes
- Faulty Ignition Switch
- Ignition Switch harness is open or shorted
- Ignition Switch circuit poor electrical connection
- Faulty Body Control Module (BCM)
How do I fix code B1142 FORDCheck the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.
Cost of diagnosing the B1142 FORD code
Labor: 1.0The cost of diagnosing the B1142 FORD code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle's make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
- Engine Light ON (or Service Engine Soon Warning Light)
B1142 Ford DescriptionOn vehicles equipped with a conventional ignition switch, fused battery voltage is sent to the ignition switch from Battery. This voltage is then sent to the Body Control Module (BCM) along one of 3 circuits, depending on ignition switch position.
On vehicles equipped with a start/stop switch, fused battery voltage is sent to one set of contacts in the start/stop switch from Battery. When the switch is pressed, this voltage is then sent to the Body Control Module (BCM), the Remote Function Actuator (RFA) module and the PCM. The other set of contacts in the start/stop switch connects the BCM to ground. When the switch is pressed, the BCM detects this ground signal and takes appropriate action.
B1142 FORD More InformationNeed more information on how to fix the B1142 FORD code?
Get Access to Factory Service Manuals
Need more help?Get the B1142 Ford code diagnosed by a professional: Find a repair shop in your area
CommentsHelp us improve AutoCodes.com. Leave a comment below or tell us if the information above help you fix the code. What are the symptoms on your vehicle for the B1142 Ford code? Have you replaced any parts?
Any information is appreciated. Thanks