B113C 2012 Ford Explorer Code - Hazard Switch Illumination Circuit Short To Ground
Quick Answer
The Front Control Interface Module (FCIM) monitors the Hazard Switch Illumination. Common causes include Faulty Hazard Switch, Hazard Switch harness is open or shorted, Hazard Switch circuit poor electrical connection. Severity is Low - monitor the vehicle and repair when practical. The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.
- What it means
- B113C 2012 Ford Explorer indicates Hazard Switch Illumination Circuit Short To Ground.
- Common causes
- Common causes include Faulty Hazard Switch, Hazard Switch harness is open or shorted, Hazard Switch circuit poor electrical connection.
- Severity
- Low - monitor the vehicle and repair when practical.
- Can I drive?
- The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.
Code B113C 2012 Ford Explorer Description
What are the Possible Causes of the DTC B113C 2012 Ford Explorer?
- Faulty Hazard Switch
- Hazard Switch harness is open or shorted
- Hazard Switch circuit poor electrical connection
- Faulty Front Control Interface Module (FCIM)
How to Fix the DTC B113C 2012 Ford Explorer?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B113C 2012 Ford Explorer code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B113C 2012 Ford Explorer code?
Need more information on how to fix the B113C 2012 Ford Explorer code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B113C 2012 Ford Explorer code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B113C 2012 Ford Explorer Code
1. What are the common symptoms of OBDII code B113C in a 2012 Ford Explorer?
- The common symptoms include the hazard switch illumination not functioning correctly, such as staying on or not illuminating at all.
2. What does OBDII code B113C on a 2012 Ford Explorer indicate?
- The code B113C indicates a short to ground in the hazard switch illumination circuit of the vehicle.
3. What are the possible causes of OBDII code B113C in a 2012 Ford Explorer?
- The possible causes include a faulty hazard switch, damaged wiring in the illumination circuit, or a short to ground in the circuit.
4. How can I diagnose the issue causing OBDII code B113C in my 2012 Ford Explorer?
- You can use a multimeter to test the continuity of the wiring in the hazard switch illumination circuit and check the condition of the hazard switch itself.
5. Is it safe to continue driving my 2012 Ford Explorer with OBDII code B113C?
- It is not recommended to drive the vehicle with this code present, as it may affect the proper functioning of the hazard switch and compromise safety.
6. Can I fix OBDII code B113C in my 2012 Ford Explorer myself?
- Depending on your skill level, you may be able to fix the issue by replacing the hazard switch or repairing the wiring. However, professional assistance may be needed for accurate diagnosis and repair.
7. How much does it typically cost to repair OBDII code B113C in a 2012 Ford Explorer?
- The cost of repair can vary depending on the extent of the damage and whether you choose to do the repair yourself or take it to a professional mechanic. It may involve replacing the hazard switch or repairing the wiring.
8. Are there any DIY tips for troubleshooting OBDII code B113C in a 2012 Ford Explorer?
- You can start by checking the fuse related to the hazard switch illumination circuit, inspecting the wiring for any visible damage, and testing the hazard switch for proper functionality.
9. Will resetting the OBDII system clear the B113C code in my 2012 Ford Explorer?
- Resetting the OBDII system may temporarily clear the code, but if the underlying issue causing the B113C code is not addressed, it is likely to reappear upon further use.
10. How important is it to address OBDII code B113C promptly in a 2012 Ford Explorer?
- It is crucial to address the B113C code promptly to ensure the proper functioning of the hazard switch and maintain safety features in the vehicle.
Discuss the causes and fixes for B113C 2012 Ford Explorer OBDII Code
Code B113C 2012 Ford Explorer comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
