B1136 Code - Left Right Side Air Bag Module Short
Quick Answer
In case of collision whose acceleration exceeds the specified level, the ignition materials are ignited by the electric ignition system. Common causes include Faulty Left Right Side Air Bag Module, Left Right Side Air Bag Module harness is open or shorted, Left Right Side Air Bag Module circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B1136 indicates Left Right Side Air Bag Module Short.
- Common causes
- Common causes include Faulty Left Right Side Air Bag Module, Left Right Side Air Bag Module harness is open or shorted, Left Right Side Air Bag Module circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B1136 Description
Front Left Side Air Bag Module mainly consists of air bag and inflator which inflates the air bag.
What are the Possible Causes of the DTC B1136?
- Faulty Left Right Side Air Bag Module
- Left Right Side Air Bag Module harness is open or shorted
- Left Right Side Air Bag Module circuit poor electrical connection
How to Fix the DTC B1136?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B1136 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B1136 code?
Need more information on how to fix the B1136 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1136 code diagnosed by a professional: Find a repair shop in your area
Information for Specific Makes
- B1136 Ford — Audio Steering Wheel Switch #2 Circuit Failure
- B1136 Infiniti — Left Right Side Air Bag Module Short
- B1136 Lincoln — Audio Steering Wheel Switch #2 Circuit Failure
- B1136 Mercury — Audio Steering Wheel Switch #2 Circuit Failure
- B1136 Nissan — Left Right Side Air Bag Module Short
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B1136 Code
1. What does the OBDII code B1136 mean?
B1136 indicates a short circuit in the wiring or connectors related to the left or right side airbag module, which can compromise the airbag system's functionality.
2. What are common symptoms of the B1136 code?
Symptoms include an illuminated airbag warning light, the airbag system being disabled, and potentially no deployment of the side airbags in the event of a collision.
3. What causes the B1136 code to appear?
Common causes include damaged or corroded wiring, faulty connectors, a defective side airbag module, or an issue with the airbag control unit.
4. Can I still drive my car with the B1136 code?
While the car may still be drivable, the airbag system may not function properly, posing a safety risk in the event of an accident.
5. How do I diagnose the B1136 code?
Diagnosis typically involves scanning the vehicle with an OBDII scanner, inspecting the wiring and connectors for damage or corrosion, and testing the side airbag module for faults.
6. How can I fix the B1136 code?
Repairs may include replacing damaged wiring or connectors, repairing or replacing the side airbag module, and resetting the airbag system using a professional scan tool.
7. Can I clear the B1136 code without fixing the problem?
Clearing the code without addressing the root cause will not resolve the issue, and the code is likely to return.
8. How much does it cost to fix the B1136 code?
Repair costs vary by vehicle and issue severity but can range from $50 for minor wiring repairs to over $500 if the side airbag module or control unit needs replacement.
9. Can the B1136 code trigger accidentally?
Yes, the code can be triggered by improper installation, accidental damage to wiring during repairs, or even water intrusion into the airbag system components.
10. Do I need a professional to repair the B1136 code?
While basic inspections can be done at home, it's recommended to have a professional handle airbag system repairs due to safety concerns and the need for specialized tools.
Discuss the causes and fixes for B1136 OBDII Code
Code B1136 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
