| All About OBDII Engine Codes
AutoCodes - Lincoln - B112A Lincoln

B112A Lincoln Code - Ignition On Relay 'B' Circuit Short To Battery

- Code Popularity: 445 Views
- Repair Importance Level: 3/3
- Repair Difficulty Level: 3/3
Table of contents
By - Updated Feb 12, 2019
Share on Facebook   Share on Twitter   Share on Linkedin

|Code B112A Lincoln Possible Causes

  • Faulty Ignition On Relay 'B'
  • Ignition On Relay 'B' harness is open or shorted
  • Ignition On Relay 'B' circuit poor electrical connection
  • Faulty Body Control Module (BCM)

|How do I Fix the Code B112A Lincoln?

Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.

Does your Lincoln have Safety Recalls? → Check here

|What is the Cost to Diagnose the Code B112A Lincoln?

Labor: 1.0

The cost of diagnosing the B112A Lincoln code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle's make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.

|What are Code B112A Lincoln Possible Symptoms?

  • Engine Light ON (or Service Engine Soon Warning Light)

|Code B112A Lincoln Description

Conventional Ignition Switch:
The ignition switch is a multiple position rotary switch that is controlled by a lock cylinder and a key. The ignition switch provides voltage to the ACC, ON, or START-designated circuits depending on the position it is placed. The Body Control Module (BCM) calculates the positions based on the voltage received from the ACC and ON-designated circuits.
The key removal inhibit solenoid (also known as the key release interlock actuator) is an electronically controlled solenoid that prevents the ignition lock cylinder from being turned to the OFF position unless the gear selector lever is in the PARK position. The key removal inhibit solenoid is part of the ignition switch.

Push Button Ignition Switch:
The push button ignition switch is used instead of a conventional ignition switch to achieve the various ignition modes. The push button ignition switch is a momentary dual contact switch. Both sets of contacts are normally open and receive the voltage at all times. When the START/STOP button is pressed, the voltage is sent to the BCM, the RFA module, and the PCM to indicate a button press.
The ignition switch has a LED for switch illumination when the backlighting is activated.

OBDII Code B112A Lincoln - Ignition On Relay 'B' Circuit Short To Battery -
B112A Lincoln Code - Ignition On Relay 'B' Circuit Short To Battery

|Need More Information on the B112A Lincoln Code?

Need more information on how to fix the B112A Lincoln code? Get Access to Factory Service Manuals

|Need Help with the B112A Lincoln Code?

Get the B112A Lincoln code diagnosed by a professional: Find a repair shop in your area

|Code B112A Lincoln comments

Help us improve Leave a comment below or tell us if the information above helps you fix the code. What are the symptoms on your vehicle for the B112A Lincoln code? Have you replaced any parts?
Any information is appreciated. Thanks