B1108 Mercury Code - Driver Door Central Locking Motor Commanded Position Not Reachable
Quick Answer
The Body Control Module (BCM) monitors the Driver Door Central Locking Motor. Common causes include Faulty Driver Door Central Locking Motor, Driver Door Central Locking Motor harness is open or shorted, Driver Door Central Locking Motor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B1108 Mercury indicates Driver Door Central Locking Motor Commanded Position Not Reachable.
- Common causes
- Common causes include Faulty Driver Door Central Locking Motor, Driver Door Central Locking Motor harness is open or shorted, Driver Door Central Locking Motor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B1108 Mercury Description
What are the Possible Causes of the DTC B1108 Mercury?
- Faulty Driver Door Central Locking Motor
- Driver Door Central Locking Motor harness is open or shorted
- Driver Door Central Locking Motor circuit poor electrical connection
How to Fix the DTC B1108 Mercury?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B1108 Mercury code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B1108 Mercury code?
Need more information on how to fix the B1108 Mercury code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1108 Mercury code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B1108 Mercury Code
1. What are common symptoms of OBDII code B1108 in a Mercury vehicle?
- Common symptoms include the driver door central locking system not functioning properly, difficulty locking or unlocking the door, and potential issues with the remote key fob.
2. What can cause the OBDII code B1108 to trigger in a Mercury vehicle?
- The code B1108 is triggered when the central locking motor in the driver door fails to reach the commanded position due to issues such as a faulty motor, wiring problems, or a malfunctioning control module.
3. How can I diagnose the OBDII code B1108 in my Mercury vehicle?
- Diagnosing the code B1108 typically involves inspecting the driver door central locking system, checking for loose connections, testing the central locking motor, and using a scan tool to read the fault codes stored in the vehicle's computer.
4. What are some repair tips for fixing OBDII code B1108 in a Mercury?
- Repair tips may include replacing the driver door central locking motor, repairing any damaged wiring or connections, resetting the central locking system, and reprogramming the control module if necessary.
5. Can OBDII code B1108 be fixed at home, or should I seek professional help?
- Depending on your level of automotive knowledge and experience, you may be able to fix the code B1108 at home by following repair guides and using the necessary tools. However, if you are unsure or uncomfortable with the repair process, it is recommended to seek professional help.
6. Are there any safety concerns associated with OBDII code B1108 in a Mercury vehicle?
- While the code B1108 itself may not pose immediate safety hazards, a malfunctioning central locking system can affect the security of the vehicle and potentially lead to issues with door accessibility and locking while driving.
7. How important is it to address OBDII code B1108 promptly in a Mercury vehicle?
- It is important to address code B1108 promptly to ensure the proper functioning of the driver door central locking system and maintain the overall security and convenience of the vehicle.
8. Can the OBDII code B1108 in a Mercury vehicle cause other related issues?
- If left unaddressed, the code B1108 can lead to further issues with the central locking system, potentially affecting the functionality of other door locks and the overall security of the vehicle.
9. Is the repair for OBDII code B1108 covered under warranty for Mercury vehicles?
- Depending on the vehicle's warranty status and coverage, the repair for code B1108 may be covered under warranty if the issue is deemed a manufacturer defect or related to a specific warranty provision.
10. How can I prevent OBDII code B1108 from occurring in my Mercury vehicle in the future?
- To prevent the recurrence of code B1108, it is important to perform regular maintenance checks on the central locking system, keep the door mechanisms clean and lubricated, and address any warning signs or issues promptly to avoid more significant problems.
Discuss the causes and fixes for B1108 Mercury OBDII Code
Code B1108 Mercury comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
