|What is the Cost to Diagnose the Code B1100 Lexus?
The cost of diagnosing the B1100 Lexus code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle's make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
|What are Code B1100 Lexus Possible Symptoms?
Air Bag Warning Light ON
|Code B1100 Lexus Description
The Center Airbag Sensor Assembly Malfunction consists of an airbag sensor, safing sensor, drive circuit, diagnosis circuit, and ignition control, etc. It receives signals from the airbag sensor, judges whether or not the SRS must be activated, and detects a diagnosis system malfunction. The Diagnostic Trouble Code (DTC) B1100 is recorded when a malfunction is detected in the Center Airbag Sensor Assembly Malfunction.
B1100 Lexus Code - Center Airbag Sensor Assembly Malfunction
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed,
it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Help us improve AutoCodes.com. Leave a comment below or tell us if the information above helps you fix the code. What are the symptoms on your vehicle for the B1100 Lexus code? Have you replaced any parts? Any information is appreciated. Thanks