B10C4 Ford Code - Right Rear Unlock Pull Switch Signal Stuck High
Quick Answer
The Remote Function Actuator (RFA) Module interprets radio frequency signals from the Remote Functions Receiver (RFR) Module and Intelligent Access (IA) key transmitters. Common causes include Faulty Right Rear Unlock Pull Switch, Right Rear Unlock Pull Switch harness is open or shorted, Right Rear Unlock Pull Switch circuit poor electrical connection. Severity is Low - monitor the vehicle and repair when practical. The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.
- What it means
- B10C4 Ford indicates Right Rear Unlock Pull Switch Signal Stuck High.
- Common causes
- Common causes include Faulty Right Rear Unlock Pull Switch, Right Rear Unlock Pull Switch harness is open or shorted, Right Rear Unlock Pull Switch circuit poor electrical connection.
- Severity
- Low - monitor the vehicle and repair when practical.
- Can I drive?
- The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.
Code B10C4 Ford Description
What are the Possible Causes of the DTC B10C4 Ford?
- Faulty Right Rear Unlock Pull Switch
- Right Rear Unlock Pull Switch harness is open or shorted
- Right Rear Unlock Pull Switch circuit poor electrical connection
- Faulty Remote Function Actuator (RFA) Module
How to Fix the DTC B10C4 Ford?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B10C4 Ford code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B10C4 Ford code?
Need more information on how to fix the B10C4 Ford code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B10C4 Ford code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B10C4 Ford Code
1. What are the common symptoms of OBDII code B10C4 in a Ford, titled Right Rear Unlock Pull Switch Signal Stuck High?
The common symptoms include difficulty unlocking the right rear door using the pull switch, erratic behavior of the door lock mechanism, and possibly triggering the vehicle's alarm system.
2. What could be causing the OBDII code B10C4 in a Ford related to the Right Rear Unlock Pull Switch Signal Stuck High?
The code B10C4 typically indicates a malfunction in the right rear door unlock pull switch circuit, which could be caused by a faulty pull switch, wiring issues, or a problem with the door lock actuator.
3. How can I diagnose the cause of OBDII code B10C4 in my Ford vehicle?
To diagnose the issue, you can start by inspecting the right rear door pull switch for any visible damage or signs of wear. Check the wiring connections for corrosion or loose connections. You may also use a multimeter to test the continuity of the circuit.
4. Is it safe to continue driving my Ford with OBDII code B10C4 indicating Right Rear Unlock Pull Switch Signal Stuck High?
While the vehicle should still be safe to drive, it is recommended to address the issue promptly to avoid potential inconvenience of not being able to unlock the right rear door or triggering the alarm unintentionally.
5. Can I repair OBDII code B10C4 in my Ford at home, or do I need professional help?
Depending on your experience with automotive repairs, you may be able to address the issue at home by replacing the right rear door unlock pull switch or repairing the wiring. If you are unsure, it is best to seek professional help.
6. What are some tips for repairing OBDII code B10C4 in a Ford with the Right Rear Unlock Pull Switch Signal Stuck High?
Ensure you have the correct replacement part for the pull switch, follow the manufacturer's guidelines for disassembly and reassembly, and carefully inspect the wiring harness for any damage or wear.
7. Will resetting the OBDII code B10C4 in a Ford make the issue go away permanently?
Resetting the code may temporarily clear the warning, but if the underlying issue with the right rear unlock pull switch signal stuck high is not addressed, the code is likely to reappear.
8. How much can I expect to pay for professional repair of OBDII code B10C4 in a Ford involving the Right Rear Unlock Pull Switch Signal Stuck High?
The cost of professional repair can vary depending on the labor rates in your area, the extent of the repair needed, and whether any parts need to be replaced. It's best to get a few quotes from reputable repair shops.
9. Are there any recalls or technical service bulletins related to OBDII code B10C4 in Ford vehicles?
It's recommended to check with your local Ford dealership or visit the National Highway Traffic Safety Administration (NHTSA) website to see if there are any recalls or technical service bulletins related to this specific OBDII code in your Ford model.
10. Can OBDII code B10C4 in a Ford cause any other issues with the vehicle's electrical system?
While the code specifically relates to the right rear unlock pull switch signal, it's possible that electrical issues in one part of the vehicle can sometimes affect other systems. If you notice any other unusual electrical behavior, it's best to have it checked by a professional.
Discuss the causes and fixes for B10C4 Ford OBDII Code
Code B10C4 Ford comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
