B10C4 Chrysler Code - Heated Steering Wheel Control Circuit Resistance Out Of Range
Quick Answer
The Heated Seat Module (HSM) detects current between 0.5 and 1.0 amp on the Heated Steering Wheel Feed circuit for more than two seconds when the output is turned on. Common causes include Faulty Heated Steering Wheel (HSW), Faulty Clockspring, Heated Steering Wheel harness is open or shorted. Severity is Low - monitor the vehicle and repair when practical. The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.
- What it means
- B10C4 Chrysler indicates Heated Steering Wheel Control Circuit Resistance Out Of Range.
- Common causes
- Common causes include Faulty Heated Steering Wheel (HSW), Faulty Clockspring, Heated Steering Wheel harness is open or shorted.
- Severity
- Low - monitor the vehicle and repair when practical.
- Can I drive?
- The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.
Code B10C4 Chrysler Description
What are the Possible Causes of the DTC B10C4 Chrysler?
- Faulty Heated Steering Wheel (HSW)
- Faulty Clockspring
- Heated Steering Wheel harness is open or shorted
- Heated Steering Wheel circuit poor electrical connection
- Faulty Heated Seat Module (HSM)
How to Fix the DTC B10C4 Chrysler?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B10C4 Chrysler code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B10C4 Chrysler code?
Need more information on how to fix the B10C4 Chrysler code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B10C4 Chrysler code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B10C4 Chrysler Code
1. What are the common symptoms of OBDII code B10C4 for a Chrysler vehicle?
- The common symptoms include a non-functioning heated steering wheel, illuminated warning light on the dashboard, and possibly a message indicating a steering wheel control issue.
2. What are the possible causes of OBDII code B10C4 in a Chrysler vehicle?
- The code B10C4 typically indicates that there is a resistance out of range in the heated steering wheel control circuit. This can be caused by a faulty heated steering wheel module, damaged wiring, or a poor connection.
3. How can I diagnose the OBDII code B10C4 in my Chrysler vehicle?
- To diagnose the code B10C4, you can use an OBDII scanner to retrieve the specific fault code. Additionally, checking the wiring and connections related to the heated steering wheel system can help identify any issues.
4. Can I continue driving my Chrysler vehicle with the OBDII code B10C4 present?
- It is not recommended to continue driving with the code B10C4 present, as it indicates a problem with the heated steering wheel control circuit. It's best to address the issue promptly to ensure safe operation of the vehicle.
5. How can I repair the OBDII code B10C4 in my Chrysler vehicle?
- Repairing the OBDII code B10C4 may involve checking and repairing any damaged wiring, ensuring proper connections, or replacing the heated steering wheel module if necessary. It's recommended to consult a professional mechanic for accurate diagnosis and repair.
6. Are there any DIY tips to troubleshoot the OBDII code B10C4 in my Chrysler vehicle?
- DIY tips to troubleshoot the code B10C4 include checking the fuse related to the heated steering wheel system, inspecting the wiring for any visible damage, and ensuring all connections are secure and free of corrosion.
7. Can weather or environmental factors contribute to triggering the OBDII code B10C4 in a Chrysler vehicle?
- Yes, extreme weather conditions or exposure to moisture can potentially damage the heated steering wheel control circuit, leading to the code B10C4. It's important to protect the steering wheel components from such elements.
8. Is it possible to reset the OBDII code B10C4 in a Chrysler vehicle without fixing the underlying issue?
- While clearing the fault code may temporarily turn off the warning light, it will not fix the underlying issue causing the code B10C4. It's essential to address the root cause to prevent further problems.
9. Will the OBDII code B10C4 affect the overall functionality of other vehicle systems in a Chrysler?
- The OBDII code B10C4 specifically relates to the heated steering wheel control circuit and may not directly affect other vehicle systems. However, unresolved electrical issues can potentially lead to more significant problems over time.
10. How can I prevent the OBDII code B10C4 from reoccurring in my Chrysler vehicle?
- To prevent the code B10C4 from reoccurring, it's essential to maintain the heated steering wheel system properly, protect it from environmental factors, and address any electrical issues promptly. Regular inspections and maintenance can help prevent future occurrences.
Discuss the causes and fixes for B10C4 Chrysler OBDII Code
Code B10C4 Chrysler comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
