B10B2 RAM - A/C Cool Down Test Performance
B10B2 RAM Possible Causes
- Faulty A/C Heater Controller
- A/C Heater Controller harness is open or shorted
- A/C Heater Controller circuit poor electrical connection
How do I fix code B10B2 RAM?Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.
Cost of diagnosing the B10B2 RAM code
Labor: 1.0The cost of diagnosing the B10B2 RAM code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle's make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
- Engine Light ON (or Service Engine Soon Warning Light)
B10B2 RAM DescriptionThe A/C Heater Controller has software to enable it to perform an A/C Cool Down Test by a command using a scan tool. This test checks for evaporator temperature drop over a predetermined time. If the test fails, this DTC will set. However, certain test conditions are required to perform this test. Failure to run this test within those parameters can result in failure of the test.
More InformationNeed more information on how to fix the B10B2 RAM code?
Get Access to Factory Service Manuals
Need more help?Get the B10b2 Ram code diagnosed by a professional: Find a repair shop in your area
CommentsHelp us improve AutoCodes.com. Leave a comment below or tell us if the information above help you fix the code. What are the symptoms on your vehicle for the B10b2 Ram code? Have you replaced any parts?
Any information is appreciated. Thanks