AutoCodes – Dodge – B10AF Dodge

B10AF Dodge Code - Right Blend Door Actuator Performance

Quick Answer

After the initial installation of the A/C Heater Control, the controller is calibrated to each individual blend/mode door actuator. Common causes include Binding Right Blend Door Actuator (Passenger), Faulty Right Blend Door Actuator, Right Blend Door Actuator harness is open or shorted. Severity is Low - monitor the vehicle and repair when practical. The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.

What it means: B10AF Dodge indicates Right Blend Door Actuator Performance.
Common causes: Common causes include Binding Right Blend Door Actuator (Passenger), Faulty Right Blend Door Actuator, Right Blend Door Actuator harness is open or shorted.
Severity: Low - monitor the vehicle and repair when practical.
Can I drive?: The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 4,590

How popular is this code, among other codes? Low

Repair Importance Level

Low (Monitor) (1 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Nov 19, 2024

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B10AF Dodge Description

After the initial installation of the A/C Heater Control, the controller is calibrated to each individual blend/mode door actuator. These calibrations are stored as in the number of pulses it takes to move the door from one stop to another. The A/C Heater Control drives the Door Actuators by the use of Door Driver circuit and a Common Door Driver circuit and monitors all door actuator pulses to detect door movement in both directions. Most of the door actuators share a common door driver circuit but each door actuator has its own unique driver circuit. Due to shared circuitry, similar DTC's can set at the same time for multiple actuators depending upon the type of circuit malfunction, its location, and the direction the actuator is moving when the malfunction is present.

OBDII Code B10AF Dodge - Right Blend Door Actuator Performance - AutoCodes.com — B10AF Dodge Code - Right Blend Door Actuator Performance

What does this mean?

What are the Possible Causes of the DTC B10AF Dodge?

Binding Right Blend Door Actuator (Passenger)
Faulty Right Blend Door Actuator
Right Blend Door Actuator harness is open or shorted
Right Blend Door Actuator circuit poor electrical connection
Faulty A/C Heater Control

How to Fix the DTC B10AF Dodge?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B10AF Dodge code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B10AF Dodge code?

Need more information on how to fix the B10AF Dodge code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B10AF Dodge code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B10AF Dodge Code

1. What are the common symptoms of OBDII code B10AF in a Dodge related to the Right Blend Door Actuator?

- Common symptoms include inconsistent temperature control on the right side of the vehicle, hot air blowing when cold is selected, or vice versa.

2. What could be causing the OBDII code B10AF in a Dodge related to the Right Blend Door Actuator?

- The code can be triggered by a faulty right blend door actuator, a malfunctioning temperature control module, or wiring issues.

3. How can I diagnose the OBDII code B10AF in my Dodge for the Right Blend Door Actuator issue?

- Diagnose by checking the blend door actuator for proper operation, inspecting the wiring for any damage, and ensuring the temperature control module is functioning correctly.

4. What are some repair tips for fixing the OBDII code B10AF related to the Right Blend Door Actuator in a Dodge?

- Repair tips include replacing the faulty blend door actuator, repairing any damaged wiring, and resetting the temperature control module.

5. Can I drive my Dodge with the OBDII code B10AF related to the Right Blend Door Actuator?

- It is not recommended to drive the vehicle with this issue as it can lead to discomfort while driving and potentially cause further damage to the HVAC system.

6. How much does it typically cost to repair the OBDII code B10AF in a Dodge due to the Right Blend Door Actuator?

- The cost of repair can vary depending on the exact cause of the issue, but it may range from $100 to $300 for parts and labor.

7. Is the OBDII code B10AF related to the Right Blend Door Actuator a common problem in Dodge vehicles?

- Yes, this code is a common issue in Dodge vehicles, especially in models with dual-zone climate control systems.

8. Can I reset the OBDII code B10AF related to the Right Blend Door Actuator in my Dodge without repairs?

- Resetting the code may temporarily clear the error, but it is recommended to diagnose and repair the underlying issue to prevent it from recurring.

9. Are there any preventive maintenance measures I can take to avoid the OBDII code B10AF related to the Right Blend Door Actuator in my Dodge?

- Regularly inspecting and maintaining the HVAC system, including the blend door actuators, can help prevent this code from appearing.

10. How long does it typically take to repair the OBDII code B10AF related to the Right Blend Door Actuator in a Dodge?

- The repair time can vary based on the exact cause of the issue and the expertise of the technician, but it may take around 1-2 hours to complete the repair.