AutoCodes – Dodge – B10AE Dodge

B10AE Dodge Code - Right Blend Door Travel Too Large

Quick Answer

After the initial installation of the A/C Heater Control, the controller is calibrated to each individual blend/mode door actuator. Common causes include Binding Right Blend Door Actuator (Passenger), Faulty Right Blend Door Actuator, Right Blend Door Actuator harness is open or shorted. Severity is Low - monitor the vehicle and repair when practical. The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.

What it means: B10AE Dodge indicates Right Blend Door Travel Too Large.
Common causes: Common causes include Binding Right Blend Door Actuator (Passenger), Faulty Right Blend Door Actuator, Right Blend Door Actuator harness is open or shorted.
Severity: Low - monitor the vehicle and repair when practical.
Can I drive?: The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 2,841

How popular is this code, among other codes? Low

Repair Importance Level

Low (Monitor) (1 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Nov 19, 2024

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B10AE Dodge Description

After the initial installation of the A/C Heater Control, the controller is calibrated to each individual blend/mode door actuator. These calibrations are stored as in the number of pulses it takes to move the door from one stop to another. The A/C Heater Control drives the Door Actuators by the use of Door Driver circuit and a Common Door Driver circuit and monitors all door actuator pulses to detect door movement in both directions. Most of the door actuators share a common door driver circuit but each door actuator has its own unique driver circuit. Due to shared circuitry, similar DTC's can set at the same time for multiple actuators depending upon the type of circuit malfunction, its location, and the direction the actuator is moving when the malfunction is present.

OBDII Code B10AE Dodge - Right Blend Door Travel Too Large - AutoCodes.com — B10AE Dodge Code - Right Blend Door Travel Too Large

What does this mean?

What are the Possible Causes of the DTC B10AE Dodge?

Binding Right Blend Door Actuator (Passenger)
Faulty Right Blend Door Actuator
Right Blend Door Actuator harness is open or shorted
Right Blend Door Actuator circuit poor electrical connection
Faulty A/C Heater Control

How to Fix the DTC B10AE Dodge?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B10AE Dodge code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B10AE Dodge code?

Need more information on how to fix the B10AE Dodge code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B10AE Dodge code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B10AE Dodge Code

1. What are the common symptoms of OBDII code B10AE in a Dodge related to the Right Blend Door Travel Too Large issue?

- Common symptoms include inconsistent temperature control inside the vehicle, unusual noises coming from the HVAC system, and the inability to adjust the temperature settings properly.

2. What could be the possible causes of the OBDII code B10AE indicating Right Blend Door Travel Too Large in a Dodge?

- The code B10AE is often triggered by a malfunctioning blend door actuator, a faulty blend door, or issues with the HVAC control module.

3. How can I diagnose the source of the Right Blend Door Travel Too Large issue in my Dodge when the OBDII code B10AE is present?

- To diagnose the problem, you may need to inspect the blend door actuator, check the blend door for proper movement, and scan the HVAC system for any additional fault codes.

4. Is it safe to continue driving my Dodge with the OBDII code B10AE related to the Right Blend Door Travel Too Large problem?

- While the vehicle may still be drivable with this issue, it is recommended to address it promptly to avoid discomfort due to temperature control issues and prevent potential damage to the HVAC system.

5. Can I repair the Right Blend Door Travel Too Large issue causing the OBDII code B10AE in my Dodge myself?

- Depending on your mechanical skills, you may be able to replace the blend door actuator or blend door yourself. However, diagnosing and repairing HVAC system issues can be complex, so professional assistance is often recommended.

6. Are there any temporary fixes or workarounds for the Right Blend Door Travel Too Large problem associated with OBDII code B10AE in a Dodge?

- In some cases, temporarily setting the HVAC system to a fixed temperature or manually adjusting the blend door position may provide a temporary workaround, but a permanent repair is still necessary.

7. How much does it typically cost to repair the Right Blend Door Travel Too Large issue triggering the OBDII code B10AE in a Dodge?

- The cost of repairing this issue can vary depending on the specific cause and the labor rates of the repair facility. Generally, replacing a blend door actuator can cost between $200 to $400, while fixing a blend door may be more expensive.

8. Can the OBDII code B10AE related to the Right Blend Door Travel Too Large problem be cleared/reset without addressing the underlying issue in a Dodge?

- Clearing the code without fixing the root cause will only temporarily remove the warning light. The issue causing the code will persist, leading to continued problems with temperature control in the vehicle.

9. What are the long-term implications of ignoring the OBDII code B10AE associated with the Right Blend Door Travel Too Large issue in a Dodge?

- Ignoring this code can result in ongoing discomfort due to inconsistent temperature control, potential damage to the HVAC system components, and a higher risk of more costly repairs in the future.

10. Is the OBDII code B10AE exclusively related to Dodge vehicles, or can it occur in other car brands as well?

- While the specific code B10AE may be unique to Dodge vehicles, similar HVAC system issues related to blend door travel can occur in other car brands, triggering different OBDII codes specific to those vehicles.