AutoCodes – Generic – B10AC

B10AC Code - Right Blend Door Control Circuit Open

Quick Answer

After the initial installation of the A/C Heater Control, the controller is calibrated to each individual blend/mode door actuator. Common causes include Binding Right Blend Door Actuator (Passenger), Faulty Right Blend Door Actuator, Right Blend Door Actuator harness is open or shorted. Severity is Low - monitor the vehicle and repair when practical. The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.

What it means: B10AC indicates Right Blend Door Control Circuit Open.
Common causes: Common causes include Binding Right Blend Door Actuator (Passenger), Faulty Right Blend Door Actuator, Right Blend Door Actuator harness is open or shorted.
Severity: Low - monitor the vehicle and repair when practical.
Can I drive?: The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 8,741

How popular is this code, among other codes? Low

Repair Importance Level

Low (Monitor) (1 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Nov 19, 2024

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B10AC Description

After the initial installation of the A/C Heater Control, the controller is calibrated to each individual blend/mode door actuator. These calibrations are stored as in the number of pulses it takes to move the door from one stop to another. The A/C Heater Control drives the Door Actuators by the use of Door Driver circuit and a Common Door Driver circuit and monitors all door actuator pulses to detect door movement in both directions. Most of the door actuators share a common door driver circuit but each door actuator has its own unique driver circuit. Due to shared circuitry, similar DTC's can set at the same time for multiple actuators depending upon the type of circuit malfunction, its location, and the direction the actuator is moving when the malfunction is present.

OBDII Code B10AC - Right Blend Door Control Circuit Open - AutoCodes.com — B10AC Code - Right Blend Door Control Circuit Open

What does this mean?

What are the Possible Causes of the DTC B10AC?

Binding Right Blend Door Actuator (Passenger)
Faulty Right Blend Door Actuator
Right Blend Door Actuator harness is open or shorted
Right Blend Door Actuator circuit poor electrical connection
Faulty A/C Heater Control

How to Fix the DTC B10AC?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B10AC code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B10AC code?

Need more information on how to fix the B10AC code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B10AC code diagnosed by a professional: Find a repair shop in your area

Information for Specific Makes

B10AC Chrysler — Right Blend Door Control Circuit Open
B10AC Dodge — Right Blend Door Control Circuit Open
B10AC Jeep — Right Blend Door Control Circuit Open
B10AC RAM — Right Blend Door Control Circuit Open

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B10AC Code

1. What does OBDII code B10AC mean?

Code B10AC indicates an open circuit in the right blend door control system, which regulates airflow temperature by adjusting the position of the blend door in the HVAC system.

2. What are the common symptoms of a B10AC code?

Symptoms include inconsistent cabin temperature, inability to control temperature on the passenger side, or unusual noises like clicking from the HVAC system.

3. What causes the B10AC code to appear?

Common causes include a faulty blend door actuator, damaged wiring or connectors, or a malfunctioning HVAC control module.

4. Can I still drive my car with a B10AC code?

Yes, you can drive the vehicle, but you may encounter issues with temperature regulation on the passenger side, which could affect comfort.

5. How do I diagnose the B10AC code?

Start by inspecting the wiring and connectors for damage or corrosion, test the blend door actuator for proper function, and verify the HVAC control module is operating correctly.

6. How is the B10AC code typically fixed?

Repairs may involve replacing the right blend door actuator, repairing damaged wiring or connectors, or reprogramming or replacing the HVAC control module if necessary.

7. How much does it cost to fix the B10AC code?

Repair costs vary but typically range from $150 to $400, depending on whether the issue is with the actuator, wiring, or control module.

8. Can I reset the B10AC code without fixing the problem?

While you can clear the code with an OBDII scanner, the issue will likely return until the underlying problem is resolved.

9. How do I prevent the B10AC code from occurring?

Regularly inspect the HVAC system components for wear or damage and ensure the system is serviced as recommended by the manufacturer.

10. Is the B10AC code specific to certain car models?

Yes, it is most commonly associated with certain makes and models that use specific HVAC systems, so always refer to your vehicleâ€™s service manual for details.