| All About OBDII Engine Codes
AutoCodes - Lincoln - B10AB Lincoln

B10AB Lincoln Code - Remote Keyless Entry Synchronization No Sub Type Information

- Code Popularity: 836 Views
- Repair Importance Level: 3/3
- Repair Difficulty Level: 3/3
Table of contents
By - Updated Mar 02, 2019
Share on Facebook   Share on Twitter   Share on Linkedin

|Code B10AB Lincoln Possible Causes

  • Reprogram Integrated Key Transponder (IKT)
  • Faulty Integrated Key Transponder (IKT)

|How do I Fix the Code B10AB Lincoln?

Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.

Does your Lincoln have Safety Recalls? → Check here

|What is the Cost to Diagnose the Code B10AB Lincoln?

Labor: 1.0

The cost of diagnosing the B10AB Lincoln code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle's make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.

|What are Code B10AB Lincoln Possible Symptoms?

  • Engine Light ON (or Service Engine Soon Warning Light)

|Code B10AB Lincoln Description

The Remote Keyless Entry (RKE) feature is controlled by the Tire Pressure Monitor (TPM) module and the Body Control Module (BCM). When a button is pressed on an Integrated Key Transponder (IKT) the Transmitter Identification Code (TIC) and RKE command is received by the internal TPM module antenna. If the TPM module determines that it is a valid and programmed TIC, it sends the RKE command and TIC to the BCM over the MS-CAN. When the BCM receives the RKE command, it carries out the command by controlling the door locks or activating the horn and turn signals for the panic alarm. The RKE transmitters and the BCM also utilize a rolling code to prevent the code from being captured by a code grabber. The system advances the counter in the RKE transmitter and the BCM every time an RKE transmitter button is pressed. A Diagnostic Trouble Code (DTC) that sets when the BCM detects the rolling counter received from an RKE transmitter is out of synchronization with the rolling counter stored in the module.

OBDII Code B10AB Lincoln - Remote Keyless Entry Synchronization No Sub Type Information -
B10AB Lincoln Code - Remote Keyless Entry Synchronization No Sub Type Information

|Need More Information on the B10AB Lincoln Code?

Need more information on how to fix the B10AB Lincoln code? Get Access to Factory Service Manuals

|Need Help with the B10AB Lincoln Code?

Get the B10AB Lincoln code diagnosed by a professional: Find a repair shop in your area

|Code B10AB Lincoln comments

Help us improve Leave a comment below or tell us if the information above helps you fix the code. What are the symptoms on your vehicle for the B10AB Lincoln code? Have you replaced any parts?
Any information is appreciated. Thanks