B1083 Infiniti Code - Front Pre-Tensioner Right Short
Quick Answer
In the case of a frontal collision that exceeds specified impact level, the diagnosis sensor unit detects the deceleration caused by the collision. Common causes include Faulty Front Pre-Tensioner Right, Front Pre-Tensioner Right harness is open or shorted, Front Pre-Tensioner Right circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B1083 Infiniti indicates Front Pre-Tensioner Right Short.
- Common causes
- Common causes include Faulty Front Pre-Tensioner Right, Front Pre-Tensioner Right harness is open or shorted, Front Pre-Tensioner Right circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B1083 Infiniti Description
The restraint system for front seat occupant consists of the pre-tensioner mechanism and load limiter mechanism.
What are the Possible Causes of the DTC B1083 Infiniti?
- Faulty Front Pre-Tensioner Right
- Front Pre-Tensioner Right harness is open or shorted
- Front Pre-Tensioner Right circuit poor electrical connection
How to Fix the DTC B1083 Infiniti?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B1083 Infiniti code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B1083 Infiniti code?
Need more information on how to fix the B1083 Infiniti code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1083 Infiniti code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B1083 Infiniti Code
1. What are the common symptoms of OBDII code B1083 Infiniti (Front Pre-Tensioner Right Short)?
The common symptoms include the airbag warning light illuminating on the dashboard and a potential failure of the front right seatbelt pre-tensioner.
2. What are the possible causes of OBDII code B1083 in an Infiniti vehicle?
The code B1083 typically indicates a short circuit in the front right seatbelt pre-tensioner or its wiring harness.
3. How can I diagnose the OBDII code B1083 in my Infiniti?
Diagnosing the code involves using a diagnostic scanner to retrieve the specific fault code, inspecting the wiring harness for any visible damage, and testing the pre-tensioner for continuity.
4. Can I continue driving my Infiniti with OBDII code B1083 present?
It is not recommended to drive the vehicle with an active airbag system fault code like B1083, as it may compromise the effectiveness of the front right seatbelt pre-tensioner in the event of a collision.
5. What is the typical repair for OBDII code B1083 in an Infiniti?
The typical repair involves replacing the front right seatbelt pre-tensioner or repairing any damaged wiring in the system, followed by clearing the fault code from the vehicle's system.
6. Are there any safety concerns associated with OBDII code B1083 in an Infiniti?
Yes, there are safety concerns as the code relates to the front right seatbelt pre-tensioner, which is a critical component of the vehicle's restraint system in the event of a crash.
7. Can I reset the OBDII code B1083 in my Infiniti without fixing the issue?
While you can clear the fault code temporarily, it is essential to address the underlying issue causing the B1083 code to ensure the proper functioning of the seatbelt pre-tensioner.
8. How much does it cost to repair OBDII code B1083 in an Infiniti?
The cost of repairing OBDII code B1083 can vary depending on the extent of the damage and whether you choose to fix it yourself or seek professional help. Costs may include parts and labor.
9. Is OBDII code B1083 a common issue in Infiniti vehicles?
While not extremely common, OBDII code B1083 can occur in Infiniti vehicles, especially in older models or those that have been involved in accidents or faced electrical issues.
10. Can I prevent OBDII code B1083 from occurring in my Infiniti?
Regular maintenance checks, avoiding accidents, and ensuring proper handling of the vehicle's electrical system can help prevent issues like OBDII code B1083 from occurring in your Infiniti.
Discuss the causes and fixes for B1083 Infiniti OBDII Code
Code B1083 Infiniti comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
