AutoCodes – Acura – B1076 Acura

B1076 Acura Code - Windshield Wiper Signal Error

Quick Answer

The Body Control Module (BCM) monitors the Windshield Wiper Signal. Common causes include Faulty Windshield Wiper Switch, Windshield Wiper Switch harness is open or shorted, Windshield Wiper Switch circuit poor electrical connection. Severity is Low - monitor the vehicle and repair when practical. The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.

What it means: B1076 Acura indicates Windshield Wiper Signal Error.
Common causes: Common causes include Faulty Windshield Wiper Switch, Windshield Wiper Switch harness is open or shorted, Windshield Wiper Switch circuit poor electrical connection.
Severity: Low - monitor the vehicle and repair when practical.
Can I drive?: The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 1,405

How popular is this code, among other codes? Low

Repair Importance Level

Low (Monitor) (1 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Nov 18, 2024

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B1076 Acura Description

The Body Control Module (BCM) monitors the Windshield Wiper Signal. The BCM sets the OBDII code when the Windshield Wiper Signal is not to factory specifications.

OBDII Code B1076 Acura - Windshield Wiper Signal Error - AutoCodes.com — B1076 Acura Code - Windshield Wiper Signal Error

What does this mean?

What are the Possible Causes of the DTC B1076 Acura?

Faulty Windshield Wiper Switch
Windshield Wiper Switch harness is open or shorted
Windshield Wiper Switch circuit poor electrical connection
Faulty Body Control Module (BCM)

How to Fix the DTC B1076 Acura?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B1076 Acura code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B1076 Acura code?

Need more information on how to fix the B1076 Acura code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B1076 Acura code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B1076 Acura Code

1. What are the common symptoms of OBDII code B1076 in an Acura related to a windshield wiper signal error?

The common symptoms may include malfunctioning windshield wipers, erratic wiper movement, or complete failure of the wipers to operate.

2. What are some possible causes of OBDII code B1076 in an Acura indicating a windshield wiper signal error?

Potential causes could be a faulty windshield wiper motor, damaged wiper linkage, a defective wiper control module, or issues with the wiper switch.

3. How can I diagnose the OBDII code B1076 in my Acura for a windshield wiper signal error?

A comprehensive diagnosis involves checking the wiper motor, examining the wiper linkage for damage, testing the wiper control module, and verifying the functionality of the wiper switch.

4. Can OBDII code B1076 in an Acura be reset to clear the windshield wiper signal error?

Resetting the code may temporarily clear it, but it is important to address the underlying issue causing the windshield wiper signal error to prevent the code from reappearing.

5. What are some recommended repair tips for addressing OBDII code B1076 in an Acura related to a windshield wiper signal error?

Repair tips may include replacing the faulty wiper motor, repairing or replacing damaged wiper linkage components, checking and replacing the wiper control module if necessary, and ensuring the wiper switch is functioning correctly.

6. Is it safe to continue driving my Acura with OBDII code B1076 indicating a windshield wiper signal error?

Driving with malfunctioning windshield wipers can compromise visibility during inclement weather, so it is recommended to address the issue promptly to ensure safe driving conditions.

7. How much does it typically cost to repair OBDII code B1076 in an Acura for a windshield wiper signal error?

The cost of repair can vary depending on the specific cause of the issue and the extent of the repairs needed. It is advisable to consult a professional mechanic for an accurate estimate.

8. Are there any preventive measures I can take to avoid OBDII code B1076 in my Acura related to a windshield wiper signal error in the future?

Regularly maintaining and lubricating the windshield wiper system, checking for any signs of wear or damage, and addressing any issues promptly can help prevent the recurrence of this error code.

9. Can extreme weather conditions contribute to triggering OBDII code B1076 in an Acura for a windshield wiper signal error?

Extreme weather conditions like heavy rain, snow, or ice accumulation can put additional stress on the wiper system, potentially leading to issues that trigger this error code.

10. Will fixing OBDII code B1076 in an Acura for a windshield wiper signal error improve the overall performance of the wiper system?

Addressing the underlying cause of the error code will improve the performance of the windshield wiper system, ensuring proper functionality and reliable operation.