AutoCodes – Ford – B106A Ford

B106A Ford Code - Pressure Sensor Range Bit Incorrect State

Quick Answer

This Diagnostic Trouble Code (DTC) may be encountered if a sensor designed for a different application is installed. Common causes include Incorrect tire pressure sensor(s) installed. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.

What it means: B106A Ford indicates Pressure Sensor Range Bit Incorrect State.
Common causes: Common causes include Incorrect tire pressure sensor(s) installed.
Severity: Moderate - service should be scheduled soon.
Can I drive?: The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 3,293

How popular is this code, among other codes? Low

Repair Importance Level

Moderate (Service soon) (2 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Nov 18, 2024

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B106A Ford Description

This Diagnostic Trouble Code (DTC) may be encountered if a sensor designed for a different application is installed. Low pressure applications utilize a black- or blue-colored sensor, while heavy duty applications utilize a green-colored sensor. The Smart Junction Box (SJB) will only allow one type of sensor to be trained using the Tire Pressure Monitoring System (TPMS) sensor training procedure. Make sure the correct sensors are used to avoid compatibility issues.

OBDII Code B106A Ford - Pressure Sensor Range Bit Incorrect State - AutoCodes.com — B106A Ford Code - Pressure Sensor Range Bit Incorrect State

What does this mean?

What are the Possible Causes of the DTC B106A Ford?

Incorrect tire pressure sensor(s) installed

How to Fix the DTC B106A Ford?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B106A Ford code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B106A Ford code?

Need more information on how to fix the B106A Ford code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B106A Ford code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B106A Ford Code

1. What are the common symptoms of OBDII code B106A in a Ford vehicle?

The common symptoms of OBDII code B106A in a Ford vehicle include issues with the pressure sensor reading, incorrect tire pressure readings on the dashboard, and potentially affecting the vehicle's traction control system.

2. What can cause the OBDII code B106A Pressure Sensor Range Bit Incorrect State in a Ford?

The OBDII code B106A in a Ford is typically caused by a malfunction in the tire pressure monitoring system (TPMS), a faulty pressure sensor, wiring issues, or a problem with the control module.

3. How can I diagnose the OBDII code B106A in my Ford for the Pressure Sensor Range Bit Incorrect State?

Diagnosing the OBDII code B106A in a Ford involves using a diagnostic scanner to read the code, checking the tire pressure sensors and wiring for any visible damage, and performing a thorough inspection of the TPMS components.

4. Can I drive my Ford with the OBDII code B106A Pressure Sensor Range Bit Incorrect State?

It is generally safe to drive your Ford with the OBDII code B106A, but it is recommended to address the issue promptly to ensure accurate tire pressure readings and proper functioning of the TPMS.

5. How do I repair the OBDII code B106A in my Ford for Pressure Sensor Range Bit Incorrect State?

Repairing the OBDII code B106A in a Ford involves replacing the faulty pressure sensor, repairing any damaged wiring, resetting the TPMS system, and clearing the trouble code with a diagnostic scanner.

6. Can a DIY enthusiast fix the OBDII code B106A in a Ford?

Depending on your level of automotive expertise, a DIY enthusiast may be able to fix the OBDII code B106A in a Ford by following repair guides, using the right tools, and being cautious when working on the TPMS components.

7. Will resetting the OBDII code B106A in a Ford make it go away permanently?

Resetting the OBDII code B106A in a Ford without addressing the underlying issue will not make it go away permanently. It is crucial to diagnose and repair the root cause of the problem to prevent the code from reoccurring.

8. How much does it cost to repair the OBDII code B106A in a Ford at a dealership or repair shop?

The cost of repairing the OBDII code B106A in a Ford at a dealership or repair shop can vary depending on the extent of the issue, the labor rates, and the cost of parts. It is advisable to get a few quotes before proceeding with the repair.

9. Can the OBDII code B106A in a Ford cause other problems if left unresolved?

If left unresolved, the OBDII code B106A in a Ford can lead to inaccurate tire pressure readings, potential safety issues, and affect the overall performance of the TPMS system. It is recommended to address the problem promptly.

10. How long does it typically take to repair the OBDII code B106A Pressure Sensor Range Bit Incorrect State in a Ford?

The time it takes to repair the OBDII code B106A in a Ford can vary depending on the specific issue, the availability of parts, and the expertise of the technician. In general, it may take a few hours to a day to complete the repair.