B1067 Nissan Code - Assist Air Bag Module Short
Quick Answer
In the case of a frontal collision whose acceleration exceeds the specified level, the ignition materials are ignited by the electric ignition system. Common causes include Faulty Assist Air Bag Module, Assist Air Bag Module harness is open or shorted, Assist Air Bag Module circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B1067 Nissan indicates Assist Air Bag Module Short.
- Common causes
- Common causes include Faulty Assist Air Bag Module, Assist Air Bag Module harness is open or shorted, Assist Air Bag Module circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B1067 Nissan Description
The front passenger air bag module mainly consists of air bag and inflator which inflates the air bag.
What are the Possible Causes of the DTC B1067 Nissan?
- Faulty Assist Air Bag Module
- Assist Air Bag Module harness is open or shorted
- Assist Air Bag Module circuit poor electrical connection
- Faulty Diagnosis Sensor Unit
How to Fix the DTC B1067 Nissan?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B1067 Nissan code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B1067 Nissan code?
Need more information on how to fix the B1067 Nissan code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1067 Nissan code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B1067 Nissan Code
1. What are the common symptoms of OBDII code B1067 Nissan - Assist Air Bag Module Short?
The common symptoms include the airbag warning light illuminated on the dashboard and a potential message indicating an issue with the airbag system.
2. What are the possible causes of OBDII code B1067 Nissan - Assist Air Bag Module Short?
Possible causes include a short circuit in the wiring, a faulty airbag module, or a malfunctioning airbag sensor.
3. How can I diagnose the OBDII code B1067 Nissan - Assist Air Bag Module Short?
Diagnosis typically involves using a diagnostic scanner to retrieve the specific fault code, inspecting the wiring for any visible damage, and testing the airbag components for proper functionality.
4. Is it safe to drive with OBDII code B1067 Nissan - Assist Air Bag Module Short?
It is not recommended to drive with this code present, as it indicates a potential issue with the airbag system, which is crucial for occupant safety in the event of a collision.
5. Can I reset the OBDII code B1067 Nissan - Assist Air Bag Module Short on my own?
While you can clear the code with a diagnostic scanner, it is important to address the underlying cause of the code to ensure the airbag system is functioning properly.
6. How much does it typically cost to repair OBDII code B1067 Nissan - Assist Air Bag Module Short?
The cost of repair can vary depending on the specific cause of the issue, but it may involve replacing damaged wiring, the airbag module, or other components in the airbag system.
7. Are there any DIY tips for fixing OBDII code B1067 Nissan - Assist Air Bag Module Short?
DIY tips may include checking the wiring connections for loose or damaged wires, ensuring proper grounding of the airbag components, and consulting the vehicle's service manual for specific instructions.
8. How long does it take to repair OBDII code B1067 Nissan - Assist Air Bag Module Short?
The repair time can vary based on the complexity of the issue and the availability of parts, but it may take a few hours to a full day for a professional technician to diagnose and repair the problem.
9. Can OBDII code B1067 Nissan - Assist Air Bag Module Short be a recurring issue?
If the underlying cause of the code is not properly addressed, it is possible for the issue to recur. Regular maintenance and timely repairs can help prevent the code from reappearing.
10. Will OBDII code B1067 Nissan - Assist Air Bag Module Short affect the vehicle's overall performance?
While the code itself may not directly impact the vehicle's performance, it is crucial to address any airbag system issues promptly to ensure occupant safety in the event of a collision.
Discuss the causes and fixes for B1067 Nissan OBDII Code
Code B1067 Nissan comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
