AutoCodes – Nissan – B1062 Nissan

B1062 Nissan Code - Air Bag Sensor Unit

Quick Answer

Detects the whole SRS electrical system and displays the malfunction either by illuminating or blinking the airbag warning lamp in the combination meter. Common causes include Faulty Air Bag Sensor Unit (Air Bag Control Module), Air Bag Sensor Unit (Air Bag Control Module) harness is open or shorted, Air Bag Sensor Unit (Air Bag Control Module) circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B1062 Nissan indicates Air Bag Sensor Unit.
Common causes: Common causes include Faulty Air Bag Sensor Unit (Air Bag Control Module), Air Bag Sensor Unit (Air Bag Control Module) harness is open or shorted, Air Bag Sensor Unit (Air Bag Control Module) circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 854

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Nov 18, 2024

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B1062 Nissan Description

Detects the whole SRS electrical system and displays the malfunction either by illuminating or blinking the airbag warning lamp in the combination meter. Malfunctioning part can be detected by the on-board self-diagnosis system. It detects a shock that exceeds specified level and monitors such systems as the driver and passenger airbag, side airbag, curtain airbag, pre-tensioner seat belts and Occupant Classification System (OCS) operate properly. It contains the G sensors for both frontal and side collisions and spare battery function in case of main battery damage in the collision. The OBDII code sets when the airbag diagnosis sensor unit is out of order or mismatch

OBDII Code B1062 Nissan - Air Bag Sensor Unit - AutoCodes.com — B1062 Nissan Code - Air Bag Sensor Unit

What does this mean?

What are the Possible Causes of the DTC B1062 Nissan?

Faulty Air Bag Sensor Unit (Air Bag Control Module)
Air Bag Sensor Unit (Air Bag Control Module) harness is open or shorted
Air Bag Sensor Unit (Air Bag Control Module) circuit poor electrical connection

How to Fix the DTC B1062 Nissan?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B1062 Nissan code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B1062 Nissan code?

Need more information on how to fix the B1062 Nissan code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B1062 Nissan code diagnosed by a professional: Find a repair shop in your area

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B1062 Nissan Code

1. What are the common symptoms of OBDII code B1062 in a Nissan related to the Air Bag Sensor Unit?

- Common symptoms include the airbag warning light staying illuminated on the dashboard and potential issues with the airbag system's functionality.

2. What are the possible causes of OBDII code B1062 in a Nissan related to the Air Bag Sensor Unit?

- The code B1062 can be triggered by a faulty airbag sensor unit, damaged wiring connections, or issues with the airbag control module.

3. How can I diagnose the OBDII code B1062 in a Nissan related to the Air Bag Sensor Unit?

- Diagnosis involves using an OBDII scanner to retrieve the specific error code, inspecting the airbag sensor unit and its connections for damage, and testing the airbag system components.

4. Can I continue driving my Nissan with OBDII code B1062 related to the Air Bag Sensor Unit?

- It is not recommended to drive the vehicle with an illuminated airbag warning light, as it indicates a potential safety risk in the event of a collision.

5. How should I repair OBDII code B1062 in a Nissan related to the Air Bag Sensor Unit?

- Repair typically involves replacing the faulty airbag sensor unit, repairing damaged wiring connections, or resetting the airbag system using a diagnostic tool.

6. Are there any DIY tips for troubleshooting OBDII code B1062 in a Nissan related to the Air Bag Sensor Unit?

- DIY tips include checking the airbag sensor unit connections for loose or damaged wires, ensuring the connectors are securely plugged in, and clearing the error code with an OBDII scanner.

7. What safety precautions should I take when working on the airbag system to address OBDII code B1062 in a Nissan?

- Prior to working on the airbag system, it is crucial to disconnect the vehicle's battery, wait for at least 10 minutes to allow residual power to dissipate, and avoid touching airbag components directly.

8. Can resetting the OBDII code B1062 related to the Air Bag Sensor Unit in a Nissan fix the underlying issue?

- Resetting the error code may temporarily clear the warning light, but it will not resolve the underlying problem with the airbag sensor unit or system. Proper diagnosis and repair are necessary.

9. How much does it typically cost to repair OBDII code B1062 in a Nissan related to the Air Bag Sensor Unit?

- Repair costs can vary depending on the exact cause of the issue, but replacing the airbag sensor unit or addressing wiring problems may range from $200 to $500, including parts and labor.

10. Can a mechanic help me with diagnosing and repairing OBDII code B1062 related to the Air Bag Sensor Unit in my Nissan?

- Yes, experienced mechanics have the expertise and diagnostic tools to accurately diagnose and repair issues related to OBDII code B1062 in the airbag system of a Nissan vehicle.