B1062 Honda Code - Relay Control Module Lost Communication With Combination Switch Control Unit
Quick Answer
The Relay Control Module monitors the Combination Switch Control Unit. Common causes include Faulty Combination Switch Control Unit, Combination Switch Control Unit harness is open or shorted, Combination Switch Control Unit circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B1062 Honda indicates Relay Control Module Lost Communication With Combination Switch Control Unit.
- Common causes
- Common causes include Faulty Combination Switch Control Unit, Combination Switch Control Unit harness is open or shorted, Combination Switch Control Unit circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B1062 Honda Description
What are the Possible Causes of the DTC B1062 Honda?
- Faulty Combination Switch Control Unit
- Combination Switch Control Unit harness is open or shorted
- Combination Switch Control Unit circuit poor electrical connection
- Faulty Relay Control Module
How to Fix the DTC B1062 Honda?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B1062 Honda code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B1062 Honda code?
Need more information on how to fix the B1062 Honda code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1062 Honda code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B1062 Honda Code
1. What are the common symptoms of OBDII code B1062 in a Honda?
The common symptoms of OBDII code B1062 in a Honda include issues with the turn signals, windshield wipers, and other related functions controlled by the combination switch.
2. What does the OBDII code B1062 Honda indicate?
OBDII code B1062 in a Honda indicates that there is a communication problem between the relay control module and the combination switch control unit.
3. What are the possible causes of OBDII code B1062 in a Honda?
Possible causes of OBDII code B1062 in a Honda include a faulty relay control module, a malfunctioning combination switch control unit, damaged wiring or connectors, or a communication error within the vehicle's network.
4. How can I diagnose the OBDII code B1062 in my Honda?
Diagnosing OBDII code B1062 in a Honda involves using a professional OBDII scanner to retrieve the specific fault codes, inspecting the relay control module and combination switch control unit for any visible damage, and checking the wiring and connectors for any issues.
5. Can I continue driving my Honda with OBDII code B1062 present?
It is not recommended to continue driving your Honda with OBDII code B1062 present, as it can lead to further electrical problems and safety issues related to the turn signals and other affected functions.
6. How can OBDII code B1062 in a Honda be repaired?
Repairing OBDII code B1062 in a Honda typically involves replacing the faulty relay control module or combination switch control unit, repairing any damaged wiring or connectors, and clearing the fault codes with an OBDII scanner.
7. Is it possible to reset OBDII code B1062 in a Honda without repairs?
Resetting OBDII code B1062 in a Honda without addressing the underlying issue is not recommended, as the problem will likely reoccur and could potentially lead to more significant electrical issues in the vehicle.
8. Are there any DIY tips for fixing OBDII code B1062 in a Honda?
DIY tips for fixing OBDII code B1062 in a Honda include checking and cleaning the electrical connections, ensuring proper grounding, and inspecting for any visible signs of damage before considering professional repairs.
9. How much does it cost to repair OBDII code B1062 in a Honda?
The cost of repairing OBDII code B1062 in a Honda can vary depending on the specific issue causing the fault code, the cost of parts, and labor rates. It is recommended to consult with a qualified mechanic for an accurate estimate.
10. Can OBDII code B1062 in a Honda be a recurring issue?
OBDII code B1062 in a Honda can be a recurring issue if the root cause of the communication problem between the relay control module and combination switch control unit is not properly addressed during repairs. Regular maintenance and thorough diagnostics can help prevent the issue from reoccurring.
Discuss the causes and fixes for B1062 Honda OBDII Code
Code B1062 Honda comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
