AutoCodesChevrolet – B1055 2017 Chevrolet Silverado

B1055 2017 Chevrolet Silverado Code - Right Rear Door Audio Output 4 Circuit

Quick Answer

Vehicles without Amplifier: Each of the audio output channel circuits (+) and (-), at the radio have a DC bias voltage that is approximately one-half of battery voltage. Common causes include Faulty Radio Unit, Faulty Audio Amplifier (If equipped), Faulty Right Rear Door Speaker. Severity is Low - monitor the vehicle and repair when practical. The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.

What it means
B1055 2017 Chevrolet Silverado indicates Right Rear Door Audio Output 4 Circuit.
Common causes
Common causes include Faulty Radio Unit, Faulty Audio Amplifier (If equipped), Faulty Right Rear Door Speaker.
Severity
Low - monitor the vehicle and repair when practical.
Can I drive?
The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 181
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Nov 18, 2024
💬 Need more help? Ask Coddy for instant answers — it's free!

Code B1055 2017 Chevrolet Silverado Description

Vehicles without Amplifier:
Each of the audio output channel circuits (+) and (-), at the radio have a DC bias voltage that is approximately one-half of battery voltage. When using a DMM, each of the audio output channel circuits will measure approximately 6.5 V DC. The audio being played on the system is produced by a varying AC voltage that is centered around the DC bias voltage on the same circuit. The AC voltage is what causes the speaker cone to move and produce sound. The frequency (Hz) of the AC voltage signal is directly related to the frequency of the input (audio source playing) to the audio system. Both the DC bias voltage and the AC voltage signals are needed for the audio system to properly produce sound.

Vehicles with Amplifier:
The Media Oriented Systems Transport (MOST) is a high-speed multimedia network technology. The serial MOST bus uses a ring topology and synchronous data communication to transmit audio, video, data and control information between any devices attached.
The audio amplifier is a participant on the MOST network. The audio amplifier receives audio input and control information from the MOST bus.
Each of the audio output channel circuits (+) and (−), at the audio amplifier have a DC bias voltage that is approximately one-half of the battery voltage. When using a DMM, each of the audio output channel circuits will measure approximately 6.5V DC. The audio being played on the system is produced by a varying AC voltage that is centered around the DC bias voltage on the same circuit. The AC voltage is what causes the speaker cone to move and produce sound.
OBDII Code B1055 2017 Chevrolet Silverado - Right Rear Door Audio Output 4 Circuit - AutoCodes.com
B1055 2017 Chevrolet Silverado Code - Right Rear Door Audio Output 4 Circuit

What are the Possible Causes of the DTC B1055 2017 Chevrolet Silverado?

  • Faulty Radio Unit
  • Faulty Audio Amplifier (If equipped)
  • Faulty Right Rear Door Speaker
  • Right Rear Door Speaker harness is open or shorted
  • Right Rear Door Speaker circuit poor electrical connection

How to Fix the DTC B1055 2017 Chevrolet Silverado?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

Code Tech Notes

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B1055 2017 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B1055 2017 Chevrolet Silverado code?

Need more information on how to fix the B1055 2017 Chevrolet Silverado code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B1055 2017 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B1055 2017 Chevrolet Silverado Code

1. What does OBDII code B1055 mean for my 2017 Chevrolet Silverado?

The B1055 code specifically pertains to the Right Rear Door Audio Output 4 Circuit in your vehicle.

2. What are the common symptoms of OBDII code B1055 in a 2017 Chevrolet Silverado?

Common symptoms include no sound from the right rear speaker, distorted audio output, or complete loss of audio from the right rear door.

3. What can cause OBDII code B1055 to trigger in a 2017 Chevrolet Silverado?

The code may be triggered by a faulty speaker, damaged wiring, a loose connection, or a problem with the audio amplifier.

4. How can I diagnose OBDII code B1055 in my 2017 Chevrolet Silverado?

To diagnose this code, you may need to inspect the right rear speaker, check the wiring connections, and test the audio system components for faults.

5. Can I repair OBDII code B1055 in my 2017 Chevrolet Silverado myself?

Depending on your technical skills, you may be able to repair this issue yourself by addressing the root cause, such as replacing the faulty speaker or repairing damaged wiring.

6. Is it safe to continue driving with OBDII code B1055 present in my 2017 Chevrolet Silverado?

It is generally safe to continue driving, but you may experience audio issues from the right rear door until the problem is resolved.

7. What are some tips for fixing OBDII code B1055 in a 2017 Chevrolet Silverado?

Start by checking the speaker and wiring connections, ensuring they are intact and functioning properly. If needed, replace the speaker or repair any damaged wiring.

8. Could weather conditions affect OBDII code B1055 in a 2017 Chevrolet Silverado?

Extreme weather conditions or moisture exposure could potentially damage the speaker or wiring, leading to the triggering of this code.

9. How much does it cost to repair OBDII code B1055 in a 2017 Chevrolet Silverado at a repair shop?

Repair costs can vary depending on the exact cause of the issue, but it is recommended to get quotes from different repair shops for an accurate estimate.

10. Will resetting the OBDII system clear code B1055 from my 2017 Chevrolet Silverado?

Resetting the OBDII system may temporarily clear the code, but if the underlying issue is not fixed, the code is likely to reappear.

Discuss the causes and fixes for B1055 2017 Chevrolet Silverado OBDII Code

Code B1055 2017 Chevrolet Silverado comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play