B104D Mercury Code - Crash Zone Sensor And Other Sensor Circuits Short To Power Supply
Quick Answer
The Air Bag Control Module monitors the Front Crash Sensor. Common causes include Faulty Front Crash Sensor, Front Crash Sensor harness is open or shorted, Front Crash Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B104D Mercury indicates Crash Zone Sensor And Other Sensor Circuits Short To Power Supply.
- Common causes
- Common causes include Faulty Front Crash Sensor, Front Crash Sensor harness is open or shorted, Front Crash Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B104D Mercury Description
What are the Possible Causes of the DTC B104D Mercury?
- Faulty Front Crash Sensor
- Front Crash Sensor harness is open or shorted
- Front Crash Sensor circuit poor electrical connection
- Faulty Air Bag Control Module
How to Fix the DTC B104D Mercury?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B104D Mercury code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B104D Mercury code?
Need more information on how to fix the B104D Mercury code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B104D Mercury code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B104D Mercury Code
1. What are the common symptoms of OBDII code B104D in a Mercury related to the Crash Zone Sensor and other sensor circuits short to power supply?
- Common symptoms may include the airbag warning light being illuminated on the dashboard, an inoperative airbag system, and potential issues with related safety features.
2. What can cause the OBDII code B104D in a Mercury indicating a Crash Zone Sensor and other sensor circuits short to power supply?
- The code can be triggered by a short circuit to power supply in the crash zone sensor circuit or other sensor circuits, usually caused by damaged wiring, faulty sensors, or a malfunctioning control module.
3. How can I diagnose and repair the OBDII code B104D in my Mercury for the Crash Zone Sensor and other sensor circuits short to power supply?
- Diagnosing and repairing this code typically involves checking the wiring and connectors for damage, testing the sensors for proper function, and addressing any issues with the control module.
4. Can driving with the OBDII code B104D related to the Crash Zone Sensor and other sensor circuits short to power supply be dangerous?
- Driving with this code may pose a safety risk as the airbag system may not deploy in the event of a collision, so it is recommended to address the issue promptly.
5. Are there any safety precautions I should take when attempting to repair the OBDII code B104D in my Mercury for the Crash Zone Sensor and other sensor circuits short to power supply?
- It is important to disconnect the vehicle's battery before working on any airbag-related components to avoid accidental deployment and potential injury.
6. How much does it typically cost to repair the OBDII code B104D in a Mercury indicating a Crash Zone Sensor and other sensor circuits short to power supply?
- The cost of repair can vary depending on the underlying cause of the issue, but it may involve replacing sensors, repairing wiring, or reprogramming the control module, which can range from moderate to expensive.
7. Can I reset the OBDII code B104D related to the Crash Zone Sensor and other sensor circuits short to power supply on my Mercury without fixing the underlying issue?
- While you can clear the code using an OBDII scanner, it is not recommended to do so without addressing the root cause, as the safety of the airbag system may be compromised.
8. Is it possible to prevent the OBDII code B104D from occurring in my Mercury related to the Crash Zone Sensor and other sensor circuits short to power supply?
- Regular maintenance and inspections of the airbag system components, such as wiring and sensors, can help prevent issues that may lead to this code.
9. Can a DIY enthusiast with automotive repair knowledge fix the OBDII code B104D in a Mercury for the Crash Zone Sensor and other sensor circuits short to power supply?
- While some DIY enthusiasts may be able to diagnose and repair simple wiring issues, dealing with airbag-related components should be approached with caution and may require professional expertise.
10. Will the OBDII code B104D related to the Crash Zone Sensor and other sensor circuits short to power supply in my Mercury reset itself over time?
- The code will not reset on its own until the underlying issue is fixed and the system is cleared with an OBDII scanner.
Discuss the causes and fixes for B104D Mercury OBDII Code
Code B104D Mercury comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
