B104D Ford Code - Crash Zone Sensor And Other Sensor Circuits Short To Power Supply
Quick Answer
The Air Bag Control Module monitors the Front Crash Sensor. Common causes include Faulty Front Crash Sensor, Front Crash Sensor harness is open or shorted, Front Crash Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B104D Ford indicates Crash Zone Sensor And Other Sensor Circuits Short To Power Supply.
- Common causes
- Common causes include Faulty Front Crash Sensor, Front Crash Sensor harness is open or shorted, Front Crash Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B104D Ford Description
What are the Possible Causes of the DTC B104D Ford?
- Faulty Front Crash Sensor
- Front Crash Sensor harness is open or shorted
- Front Crash Sensor circuit poor electrical connection
- Faulty Air Bag Control Module
How to Fix the DTC B104D Ford?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B104D Ford code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B104D Ford code?
Need more information on how to fix the B104D Ford code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B104D Ford code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B104D Ford Code
1. What are the common symptoms of OBDII code B104D in a Ford vehicle?
- Common symptoms may include the airbag warning light being illuminated on the dashboard, issues with the airbag system, and potential safety concerns related to the crash zone sensor.
2. What could cause the Crash Zone Sensor And Other Sensor Circuits Short To Power Supply error code (B104D) in a Ford vehicle?
- The code B104D may be triggered by a short to power supply in the crash zone sensor circuits, faulty wiring, damaged sensors, or issues with the airbag control module.
3. How can I diagnose the Crash Zone Sensor And Other Sensor Circuits Short To Power Supply issue in my Ford vehicle?
- Diagnosis typically involves using an OBDII scanner to retrieve the specific error code, inspecting the crash zone sensor circuits, checking for damaged wiring, and testing the sensors for proper functionality.
4. Is it safe to drive with the B104D error code in a Ford vehicle?
- It is not recommended to drive with the B104D error code present, as it indicates potential issues with the airbag system that could compromise its functionality in the event of a collision.
5. Can I reset the B104D error code in my Ford vehicle myself?
- While you can clear the error code using an OBDII scanner, it is important to diagnose and address the underlying cause of the issue to ensure the safety and proper functioning of the airbag system.
6. What are some repair tips for fixing the Crash Zone Sensor And Other Sensor Circuits Short To Power Supply problem in a Ford vehicle?
- Repair tips may include checking and repairing damaged wiring, replacing faulty sensors, resetting the airbag control module, and ensuring all connections are secure and free of corrosion.
7. How much does it typically cost to repair the B104D error code in a Ford vehicle?
- The cost of repairs can vary depending on the extent of the issue, the parts needed for replacement, and whether professional assistance is required. It is advisable to consult a qualified mechanic for an accurate estimate.
8. Can the B104D error code be a false alarm in a Ford vehicle?
- While false alarms are possible, it is crucial to take the B104D error code seriously and investigate the potential underlying issues with the airbag system to ensure it is functioning correctly in case of an accident.
9. Are there any recalls related to the B104D error code in Ford vehicles?
- It is recommended to check with Ford or the National Highway Traffic Safety Administration (NHTSA) for any recalls or service bulletins related to the B104D error code to address potential safety concerns promptly.
10. How long does it typically take to repair the Crash Zone Sensor And Other Sensor Circuits Short To Power Supply issue in a Ford vehicle?
- The repair time can vary depending on the complexity of the problem, availability of parts, and the expertise of the technician. It is advisable to consult with a professional for an estimated repair timeline.
Discuss the causes and fixes for B104D Ford OBDII Code
Code B104D Ford comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
