B104D Dodge Code - Blend Door Control Circuit Low
Quick Answer
The Powertrain Control Module (PCM) factors the Blend Door position and Blower Motor speed information into the coolant temperature modeling. Common causes include Faulty Blend Door Actuator, Blend Door Actuator harness is open or shorted, Blend Door Actuator circuit poor electrical connection. Severity is Low - monitor the vehicle and repair when practical. The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.
- What it means
- B104D Dodge indicates Blend Door Control Circuit Low.
- Common causes
- Common causes include Faulty Blend Door Actuator, Blend Door Actuator harness is open or shorted, Blend Door Actuator circuit poor electrical connection.
- Severity
- Low - monitor the vehicle and repair when practical.
- Can I drive?
- The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.
Code B104D Dodge Description
What are the Possible Causes of the DTC B104D Dodge?
- Faulty Blend Door Actuator
- Blend Door Actuator harness is open or shorted
- Blend Door Actuator circuit poor electrical connection
- Faulty Heating, Ventilation, & Air Conditioning (HVAC) Module
How to Fix the DTC B104D Dodge?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B104D Dodge code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B104D Dodge code?
Need more information on how to fix the B104D Dodge code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B104D Dodge code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B104D Dodge Code
1. What are the common symptoms of OBDII code B104D Dodge (Blend Door Control Circuit Low)?
- Common symptoms include issues with temperature control in the vehicle's HVAC system, such as the inability to adjust the temperature or only hot or cold air coming out of the vents.
2. What are the potential causes of the B104D Dodge code?
- The code B104D is usually triggered by a malfunction in the blend door actuator or a fault in the blend door control circuit, which can be caused by wiring issues, a faulty blend door actuator, or a defective HVAC control module.
3. How can I diagnose the B104D code in my Dodge vehicle?
- To diagnose the B104D code, a professional diagnostic scan tool is needed to retrieve the specific fault code. Further testing may involve checking the blend door actuator, inspecting the wiring harness for damage, and testing the HVAC control module.
4. Can I continue to drive my vehicle with the B104D code present?
- While it may be possible to continue driving with the B104D code present, it is not recommended as it can lead to discomfort due to the HVAC system not functioning correctly. Additionally, unresolved issues with the blend door control circuit may cause further damage over time.
5. How can I repair the B104D Dodge code?
- Repairing the B104D code typically involves replacing the faulty blend door actuator, repairing any damaged wiring in the blend door control circuit, or replacing the HVAC control module if necessary. It is recommended to consult a qualified mechanic for proper diagnosis and repair.
6. Is the B104D code specific to a certain Dodge vehicle model?
- The B104D code may appear in various Dodge vehicle models, particularly those equipped with an HVAC system that utilizes blend door control for temperature regulation.
7. What are some DIY tips for troubleshooting the B104D code?
- DIY tips for troubleshooting the B104D code include checking the fuse related to the HVAC system, ensuring all HVAC controls are functioning properly, and visually inspecting the blend door actuator for any visible damage.
8. Can a low car battery cause the B104D code to appear?
- Yes, a low car battery can potentially cause electrical issues that may trigger the B104D code. It is advisable to ensure the car battery is in good condition when diagnosing the code.
9. How long does it typically take to repair the B104D Dodge code?
- The repair time for the B104D code can vary depending on the exact cause of the issue and the complexity of the repair. In general, it may take anywhere from 1-3 hours for a professional mechanic to diagnose and fix the problem.
10. Are there any preventive measures to avoid the B104D code in the future?
- Regular maintenance of the HVAC system, including checking for any unusual noises or issues with temperature control, can help prevent the occurrence of the B104D code. Additionally, addressing any HVAC system problems promptly may help avoid more significant issues down the line.
Discuss the causes and fixes for B104D Dodge OBDII Code
Code B104D Dodge comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
