AutoCodesChevrolet – B1035 2017 Chevrolet Silverado

B1035 2017 Chevrolet Silverado Code - Right Front Door Audio Output 2 Circuit

Quick Answer

Vehicles without Amplifier: Each of the audio output channel circuits (+) and (-), at the radio have a DC bias voltage that is approximately one-half of battery voltage. Common causes include Faulty Radio Unit, Faulty Audio Amplifier (If equipped), Faulty Right Front Door Speaker. Severity is Low - monitor the vehicle and repair when practical. The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.

What it means
B1035 2017 Chevrolet Silverado indicates Right Front Door Audio Output 2 Circuit.
Common causes
Common causes include Faulty Radio Unit, Faulty Audio Amplifier (If equipped), Faulty Right Front Door Speaker.
Severity
Low - monitor the vehicle and repair when practical.
Can I drive?
The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 313
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Apr 12, 2023
💬 Need more help? Ask Coddy for instant answers — it's free!

Code B1035 2017 Chevrolet Silverado Description

Vehicles without Amplifier:
Each of the audio output channel circuits (+) and (-), at the radio have a DC bias voltage that is approximately one-half of battery voltage. When using a DMM, each of the audio output channel circuits will measure approximately 6.5 V DC. The audio being played on the system is produced by a varying AC voltage that is centered around the DC bias voltage on the same circuit. The AC voltage is what causes the speaker cone to move and produce sound. The frequency (Hz) of the AC voltage signal is directly related to the frequency of the input (audio source playing) to the audio system. Both the DC bias voltage and the AC voltage signals are needed for the audio system to properly produce sound.

Vehicles with Amplifier:
The Media Oriented Systems Transport (MOST) is a high-speed multimedia network technology. The serial MOST bus uses a ring topology and synchronous data communication to transmit audio, video, data and control information between any devices attached.
The audio amplifier is a participant on the MOST network. The audio amplifier receives audio input and control information from the MOST bus.
Each of the audio output channel circuits (+) and (−), at the audio amplifier have a DC bias voltage that is approximately one-half of the battery voltage. When using a DMM, each of the audio output channel circuits will measure approximately 6.5V DC. The audio being played on the system is produced by a varying AC voltage that is centered around the DC bias voltage on the same circuit. The AC voltage is what causes the speaker cone to move and produce sound.
OBDII Code B1035 2017 Chevrolet Silverado - Right Front Door Audio Output 2 Circuit - AutoCodes.com
B1035 2017 Chevrolet Silverado Code - Right Front Door Audio Output 2 Circuit

What are the Possible Causes of the DTC B1035 2017 Chevrolet Silverado?

  • Faulty Radio Unit
  • Faulty Audio Amplifier (If equipped)
  • Faulty Right Front Door Speaker
  • Right Front Door Speaker harness is open or shorted
  • Right Front Door Speaker circuit poor electrical connection

How to Fix the DTC B1035 2017 Chevrolet Silverado?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

Code Tech Notes

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B1035 2017 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B1035 2017 Chevrolet Silverado code?

Need more information on how to fix the B1035 2017 Chevrolet Silverado code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B1035 2017 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B1035 2017 Chevrolet Silverado Code

1. What does the OBDII code B1035 mean on a 2017 Chevrolet Silverado?

The code B1035 indicates a fault in the Right Front Door Audio Output 2 Circuit, which typically relates to problems with the speaker or wiring in the right front door.

2. What are the symptoms of the B1035 code in a 2017 Chevrolet Silverado?

Common symptoms include no sound or distorted audio from the right front door speaker or intermittent sound issues.

3. What causes the B1035 code to appear in a 2017 Chevrolet Silverado?

The code can be triggered by a damaged speaker, faulty wiring, a loose connection, or a malfunctioning audio amplifier.

4. How can I diagnose the B1035 code on my Silverado?

Start by inspecting the right front door speaker, checking for damaged wires or loose connections. Use a multimeter to test continuity in the circuit and verify power to the speaker.

5. Can a blown speaker cause the B1035 code?

Yes, a blown or damaged speaker can disrupt the circuit and trigger the B1035 code.

6. Is it safe to drive with the B1035 code present?

Yes, the code does not affect vehicle performance or safety, but the audio system may not function properly.

7. How do I fix the B1035 code on a 2017 Chevrolet Silverado?

Repair or replace the faulty speaker, fix damaged wiring or connections, and, if necessary, replace the audio amplifier.

8. Can a software update fix the B1035 code in the Silverado?

While unlikely, a software update for the vehicle's audio control module could resolve rare communication issues, but hardware issues are more common.

9. How much does it cost to repair the B1035 code issue?

The cost depends on the exact problem but can range from $50 for wiring repairs to $200 or more for a speaker replacement.

10. Can I reset the B1035 code without fixing the problem?

You can clear the code with a scanner, but it will likely return if the underlying issue isn’t resolved.

Discuss the causes and fixes for B1035 2017 Chevrolet Silverado OBDII Code

Code B1035 2017 Chevrolet Silverado comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play