B1030 CHRYSLER - Evaporator Temperature Sensor Circuit Short To Ground
B1030 CHRYSLER Possible Causes
- Faulty Evaporator Temperature Sensor
- Evaporator Temperature Sensor harness is open or shorted
- Evaporator Temperature Sensor circuit poor electrical connection
- Faulty A/C Heater Module
First diagnose B1030 CHRYSLER code
Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.
Cost of diagnosing the B1030 CHRYSLER code
Labor: 1.0The cost of diagnosing the B1030 CHRYSLER code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle's make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
B1030 CHRYSLER Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
B1030 Chrysler DescriptionThe Evaporator Temperature Sensor is a variable resistor that changes in conjunction with temperature, or otherwise known as a thermistor. The Evaporator Temperature Sensor is located in the HVAC housing downstream of the A/C evaporator. The A/C Heater Module monitors the evaporator temperature by monitoring the voltage change of the Evaporator Temperature Sensor Signal circuit. If the monitored voltage drops below or rises above a predetermined voltage, a Diagnostic Trouble Code (DTC) will set. For further information.
B1030 CHRYSLER More InformationNeed more information on how to fix the B1030 CHRYSLER code?
Get Access to Factory Service Manuals
Need more help?Get the B1030 Chrysler code diagnosed by a professional: Find a repair shop in your area
B1030 CHRYSLER CommentsHelp us improve AutoCodes.com. Leave a comment below or tell us if the information above help you fix the code. What are the symptoms on your vehicle for the B1030 Chrysler code? Have you replaced any parts?
Any information is appreciated. Thanks