B1027 Code - Diagnosis Sensor Unit
Quick Answer
The Air Bag Diagnosis Sensor Unit detects the whole SRS electrical system and displays the malfunction either by illuminating or blinking the air bag warning lamp in the combination meter. Common causes include Faulty Diagnosis Sensor Unit, Diagnosis Sensor Unit harness is open or shorted, Diagnosis Sensor Unit circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B1027 indicates Diagnosis Sensor Unit.
- Common causes
- Common causes include Faulty Diagnosis Sensor Unit, Diagnosis Sensor Unit harness is open or shorted, Diagnosis Sensor Unit circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B1027 Description
The Air Bag Diagnosis Sensor Unit contains the “G†sensors for both frontal and side collisions and spare battery function in case of main battery damaged in a collision.
What are the Possible Causes of the DTC B1027?
- Faulty Diagnosis Sensor Unit
- Diagnosis Sensor Unit harness is open or shorted
- Diagnosis Sensor Unit circuit poor electrical connection
How to Fix the DTC B1027?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B1027 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B1027 code?
Need more information on how to fix the B1027 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1027 code diagnosed by a professional: Find a repair shop in your area
Information for Specific Makes
- B1027 Acura — Trunk Key Cylinder Switch Signal Error
- B1027 Honda — Trunk Key Cylinder Switch Signal Error
- B1027 Infiniti — Diagnosis Sensor Unit
- B1027 Nissan — Diagnosis Sensor Unit
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B1027 Code
1. What does OBDII code B1027 mean?
- OBDII code B1027 refers to a fault in the Diagnosis Sensor Unit, which is responsible for monitoring various vehicle systems.
2. What are common symptoms of OBDII code B1027?
- Common symptoms of OBDII code B1027 may include issues with the airbag system, such as the airbag light staying on or not deploying correctly in case of an accident.
3. What are possible causes of OBDII code B1027?
- Possible causes of OBDII code B1027 include a malfunctioning Diagnosis Sensor Unit, wiring issues, or a faulty connection to the airbag system.
4. How can I diagnose OBDII code B1027?
- Diagnosing OBDII code B1027 typically involves using a diagnostic scanner to read the fault code and checking the Diagnosis Sensor Unit and related components for any visible damage or loose connections.
5. Can I drive my vehicle with OBDII code B1027?
- It is not recommended to drive your vehicle with OBDII code B1027, as it indicates a potential issue with the airbag system, which is crucial for safety in case of a collision.
6. How can I repair OBDII code B1027?
- Repairing OBDII code B1027 may involve replacing the Diagnosis Sensor Unit, repairing any damaged wiring or connections, and clearing the fault code with a diagnostic scanner.
7. Is it safe to reset OBDII code B1027 without fixing the issue?
- It is not recommended to reset OBDII code B1027 without fixing the underlying issue, as it may pose a safety risk in case of an accident due to a malfunctioning airbag system.
8. Can a DIY enthusiast fix OBDII code B1027 at home?
- While some DIY enthusiasts may have the skills to diagnose and repair OBDII code B1027, it is recommended to seek professional help, especially when dealing with safety-critical systems like the airbag.
9. How much does it cost to repair OBDII code B1027?
- The cost of repairing OBDII code B1027 can vary depending on the extent of the issue, the parts needed for replacement, and labor costs, but it may range from a few hundred to over a thousand dollars.
10. Will OBDII code B1027 cause my vehicle to fail an emissions test?
- OBDII code B1027 is not directly related to emissions, so it may not cause your vehicle to fail an emissions test. However, it is still important to address the issue for safety reasons.
Discuss the causes and fixes for B1027 OBDII Code
Code B1027 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
