B1025 2015 GMC Sierra Code - Left Front Door Audio Output 1 Circuit
Quick Answer
Vehicles without Amplifier: Each of the audio output channel circuits (+) and (-), at the radio have a DC bias voltage that is approximately one-half of battery voltage. Common causes include Faulty Radio Unit, Faulty Audio Amplifier (If equipped), Faulty Left Front Door Speaker. Severity is Low - monitor the vehicle and repair when practical. The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.
- What it means
- B1025 2015 GMC Sierra indicates Left Front Door Audio Output 1 Circuit.
- Common causes
- Common causes include Faulty Radio Unit, Faulty Audio Amplifier (If equipped), Faulty Left Front Door Speaker.
- Severity
- Low - monitor the vehicle and repair when practical.
- Can I drive?
- The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.
Code B1025 2015 GMC Sierra Description
Each of the audio output channel circuits (+) and (-), at the radio have a DC bias voltage that is approximately one-half of battery voltage. When using a DMM, each of the audio output channel circuits will measure approximately 6.5 V DC. The audio being played on the system is produced by a varying AC voltage that is centered around the DC bias voltage on the same circuit. The AC voltage is what causes the speaker cone to move and produce sound. The frequency (Hz) of the AC voltage signal is directly related to the frequency of the input (audio source playing) to the audio system. Both the DC bias voltage and the AC voltage signals are needed for the audio system to properly produce sound.
Vehicles with Amplifier:
The Media Oriented Systems Transport (MOST) is a high-speed multimedia network technology. The serial MOST bus uses a ring topology and synchronous data communication to transmit audio, video, data and control information between any devices attached.
The audio amplifier is a participant on the MOST network. The audio amplifier receives audio input and control information from the MOST bus.
Each of the audio output channel circuits (+) and (−), at the audio amplifier have a DC bias voltage that is approximately one-half of the battery voltage. When using a DMM, each of the audio output channel circuits will measure approximately 6.5V DC. The audio being played on the system is produced by a varying AC voltage that is centered around the DC bias voltage on the same circuit. The AC voltage is what causes the speaker cone to move and produce sound.
What are the Possible Causes of the DTC B1025 2015 GMC Sierra?
- Faulty Radio Unit
- Faulty Audio Amplifier (If equipped)
- Faulty Left Front Door Speaker
- Left Front Door Speaker harness is open or shorted
- Left Front Door Speaker circuit poor electrical connection
How to Fix the DTC B1025 2015 GMC Sierra?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
B1025:02 Left Front Door Audio Output 1 Circuit Short to Ground
B1025:04 Left Front Door Audio Output 1 Circuit Open
User Submitted Video
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B1025 2015 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B1025 2015 GMC Sierra code?
Need more information on how to fix the B1025 2015 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1025 2015 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B1025 2015 GMC Sierra Code
Q: What does the OBDII code B1025 mean for a 2015 GMC Sierra?
1. **A:** The code B1025 indicates an issue with the Left Front Door Audio Output 1 Circuit, typically related to the speaker or wiring. 2.
Q: What are the common symptoms of the B1025 code in a 2015 GMC Sierra?
**A:** Common symptoms include no sound or distorted audio from the left front door speaker. 3.
Q: What causes the B1025 code to appear?
**A:** Possible causes include a faulty speaker, damaged wiring, a loose connector, or a malfunctioning amplifier. 4.
Q: Can a bad speaker trigger the B1025 code on a 2015 GMC Sierra?
**A:** Yes, a defective left front door speaker can cause this code to set. 5.
Q: How can I diagnose the B1025 code on my 2015 GMC Sierra?
**A:** Start by inspecting the left front door speaker, checking for loose connections, damaged wiring, or testing the speaker for continuity. 6.
Q: Is the amplifier a possible cause of the B1025 code?
**A:** Yes, a malfunctioning amplifier can disrupt the audio signal, leading to this code. 7.
Q: Can I still drive my 2015 GMC Sierra with the B1025 code?
**A:** Yes, the vehicle is drivable, but you may experience issues with audio output from the left front door speaker. 8.
Q: How do I fix the B1025 code on a 2015 GMC Sierra?
**A:** Repairs may involve replacing the speaker, repairing damaged wiring, securing loose connectors, or replacing the amplifier if necessary. 9.
Q: Does clearing the B1025 code fix the issue permanently?
**A:** Clearing the code resets the system temporarily, but the underlying issue must be fixed to prevent the code from returning. 10.
Q: Can water damage cause the B1025 code on a 2015 GMC Sierra?
**A:** Yes, water intrusion into the door panel can damage the speaker or wiring, potentially triggering this code.
Discuss the causes and fixes for B1025 2015 GMC Sierra OBDII Code
Code B1025 2015 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
