AutoCodes – Generic – B1024

B1024 Code - Circuit Board Temperature Sensor

Quick Answer

The internal module circuitry temperature is monitored. Common causes include Faulty Radio, Faulty Audio Amplifier (If equipped), Faulty Human Machine Interface Control Module (If equipped). Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
B1024 indicates Circuit Board Temperature Sensor.
Common causes
Common causes include Faulty Radio, Faulty Audio Amplifier (If equipped), Faulty Human Machine Interface Control Module (If equipped).
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 1,644
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Apr 06, 2023
πŸ’¬ Need more help? Ask Coddy for instant answers β€” it's free!

Code B1024 Description

The internal module circuitry temperature is monitored. If an over-heat condition that exceeds the maximum threshold of the internal circuitry or a malfunctioning temperature sensor is detected, the module will shut down until the internal circuitry cools. The Diagnostic Trouble Code (DTC) will be set when the module detects an over-heat condition or a malfunctioning sensor.
OBDII Code B1024 - Circuit Board Temperature Sensor - AutoCodes.com
B1024 Code - Circuit Board Temperature Sensor

What are the Possible Causes of the DTC B1024?

  • Faulty Radio
  • Faulty Audio Amplifier (If equipped)
  • Faulty Human Machine Interface Control Module (If equipped)

How to Fix the DTC B1024?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

Code Tech Notes

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B1024 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B1024 code?

Need more information on how to fix the B1024 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B1024 code diagnosed by a professional: Find a repair shop in your area

Information for Specific Makes

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B1024 Code

1. What does the OBDII code B1024 mean?

The code B1024 indicates an issue with the circuit board temperature sensor, which monitors the temperature of a circuit board within a vehicle's electronic system.

2. What are the common symptoms of a B1024 code?

Symptoms may include erratic electronic system behavior, warning lights on the dashboard, or malfunctioning components reliant on the affected circuit board.

3. What causes the B1024 code to appear?

Common causes include a faulty temperature sensor, damaged wiring or connectors, overheating of the circuit board, or a malfunctioning control module.

4. Can I drive my car with the B1024 code?

While the car may remain drivable, ignoring the issue could lead to further electronic system failures or damage from overheating.

5. How is the B1024 code diagnosed?

A technician will typically inspect the sensor, wiring, and circuit board for damage, check for overheating, and use a scan tool to confirm the fault.

6. What repairs can fix the B1024 code?

Repairs may include replacing the circuit board temperature sensor, repairing damaged wiring or connectors, or addressing any overheating issues.

7. Is the B1024 code specific to certain vehicles?

While it can occur in various vehicles, its exact meaning and location may vary by manufacturer. Consult your vehicle's service manual for specifics.

8. What tools are needed to fix a B1024 code?

Tools may include a diagnostic scanner, multimeter for testing circuits, and basic hand tools for replacing components.

9. How much does it cost to repair a B1024 code?

Repair costs vary depending on the vehicle and whether the issue is with the sensor, wiring, or circuit board. It typically ranges from $100 to $500.

10. Can a B1024 code reset itself?

The code may clear temporarily if the issue appears intermittent, but it will return if the underlying problem is not addressed.

Discuss the causes and fixes for B1024 OBDII Code

Code B1024 comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play