AutoCodes – GMC – B101E 2018 GMC Sierra

B101E 2018 GMC Sierra Code - Electronic Control Unit Software

Quick Answer

Some Electronic Control Units must be configured with specific software, serial numbers, vehicle options, or other information. Common causes include Reprogram Electronic Control Unit, Faulty Electronic Control Unit, Electronic Control Unit harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B101E 2018 GMC Sierra indicates Electronic Control Unit Software.
Common causes: Common causes include Reprogram Electronic Control Unit, Faulty Electronic Control Unit, Electronic Control Unit harness is open or shorted.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 351

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Apr 06, 2023

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B101E 2018 GMC Sierra Description

Some Electronic Control Units must be configured with specific software, serial numbers, vehicle options, or other information. If an Electronic Control Unit was not properly configured after installation that module may set Diagnostic Trouble Code (DTC) B101E. The symptom byte information is for engineering reference only. No external circuit diagnosis is involved.

OBDII Code B101E 2018 GMC Sierra - Electronic Control Unit Software - AutoCodes.com — B101E 2018 GMC Sierra Code - Electronic Control Unit Software

What does this mean?

What are the Possible Causes of the DTC B101E 2018 GMC Sierra?

Reprogram Electronic Control Unit
Faulty Electronic Control Unit
Electronic Control Unit harness is open or shorted
Electronic Control Unit circuit poor electrical connection

How to Fix the DTC B101E 2018 GMC Sierra?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

When the Diagnostic Trouble Code (DTC) B101E is set, it will affect only the Electronic Control Unit the code is set. Before replacing the Electronic Control Unit try reprogramming the Electronic Control Unit software.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B101E 2018 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B101E 2018 GMC Sierra code?

Need more information on how to fix the B101E 2018 GMC Sierra code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B101E 2018 GMC Sierra code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B101E 2018 GMC Sierra Code

1. What does the OBDII code B101E for a 2018 GMC Sierra indicate?

The B101E code in a 2018 GMC Sierra relates to a fault in the Electronic Control Unit (ECU) software.

2. What are the common symptoms associated with OBDII code B101E in a 2018 GMC Sierra?

Common symptoms of the B101E code may include engine misfires, rough idling, poor fuel economy, and in some cases, the vehicle may enter a reduced power mode.

3. What are the possible causes of the B101E trouble code in a 2018 GMC Sierra?

The B101E code in a 2018 GMC Sierra can be triggered by issues such as corrupted ECU software, faulty sensors, wiring problems, or a malfunctioning ECU itself.

4. How can I diagnose the B101E OBDII code in my 2018 GMC Sierra?

To diagnose the B101E code, it is recommended to use an OBDII scanner to retrieve the specific fault codes. Further testing may be needed to pinpoint the exact cause, such as checking the ECU connections and inspecting related components.

5. Can I still drive my 2018 GMC Sierra with the B101E code present?

It is not advisable to continue driving your 2018 GMC Sierra with the B101E code active, as it may lead to further damage and potential safety risks. Have the issue diagnosed and repaired as soon as possible.

6. How can I reset the B101E trouble code in my 2018 GMC Sierra?

Resetting the B101E code in a 2018 GMC Sierra can be done using an OBDII scanner, which allows you to clear the fault codes stored in the ECU memory. However, it is essential to address the underlying issue to prevent the code from reoccurring.

7. Is the repair for the B101E code in a 2018 GMC Sierra costly?

The repair cost for the B101E code in a 2018 GMC Sierra can vary depending on the exact cause of the issue. Simple fixes like software updates may be relatively inexpensive, while replacing a faulty ECU can be more costly.

8. Can a DIY enthusiast fix the B101E code in a 2018 GMC Sierra?

While some aspects of diagnosing and repairing the B101E code may be within reach of a DIY enthusiast, it is recommended to consult a professional mechanic for a comprehensive diagnosis and repair to ensure the issue is properly resolved.

9. How often does the B101E code occur in a 2018 GMC Sierra?

The B101E code in a 2018 GMC Sierra is relatively uncommon compared to more common OBDII codes. However, if triggered, it should be addressed promptly to prevent any potential complications.

10. Will the B101E code in a 2018 GMC Sierra affect the vehicle's overall performance?

The B101E code can impact the performance of a 2018 GMC Sierra by causing drivability issues and potential power loss. It is important to address the code promptly to maintain the vehicle's optimal performance.