AutoCodes – Chevrolet – B101D 2014 Chevrolet Silverado

B101D 2014 Chevrolet Silverado Code - Electronic Control Unit Hardware

Quick Answer

Internal fault detection is handled inside the device. Common causes include Faulty Electronic Control Unit, Electronic Control Unit harness is open or shorted, Electronic Control Unit circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B101D 2014 Chevrolet Silverado indicates Electronic Control Unit Hardware.
Common causes: Common causes include Faulty Electronic Control Unit, Electronic Control Unit harness is open or shorted, Electronic Control Unit circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 598

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Apr 06, 2023

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B101D 2014 Chevrolet Silverado Description

Internal fault detection is handled inside the device. The symptom byte information is for engineering reference only. No external circuit diagnosis is involved. The Diagnostic Trouble Code (DTC) will be set when the device has detected an internal malfunction. This DTC will affect only the device to which the code is set. Do not replace a device based only on DTC B101D being set in history except for the Inflatable Restraint Sensing and Diagnostic Module (SDM) and the Passenger Presence Module. If the DTC B101D is set as current, replace the appropriate device.

OBDII Code B101D 2014 Chevrolet Silverado - Electronic Control Unit Hardware - AutoCodes.com — B101D 2014 Chevrolet Silverado Code - Electronic Control Unit Hardware

What does this mean?

What are the Possible Causes of the DTC B101D 2014 Chevrolet Silverado?

Faulty Electronic Control Unit
Electronic Control Unit harness is open or shorted
Electronic Control Unit circuit poor electrical connection

How to Fix the DTC B101D 2014 Chevrolet Silverado?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

Do not replace a device based only on Diagnostic Trouble Code (DTC) B101D being set in history except for the Inflatable Restraint Sensing and Diagnostic Module (SDM) and the Passenger Presence Module. If the DTC B101D is set as current, replace the appropriate device.

B101D:F0 set in the BCM after a dead battery event. The rare condition that sets B101D:F0 is an extremely dead battery case. It is NOT the cause of the dead battery, but the extremely low voltage is a trigger that causes this DTC to be set. If DTC B101D:F0 is set current in the Body Control Module (BCM), clear the codes. If DTC B101D:F0 clears with no other symptoms, DO NOT replace the BCM.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B101D 2014 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B101D 2014 Chevrolet Silverado code?

Need more information on how to fix the B101D 2014 Chevrolet Silverado code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B101D 2014 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B101D 2014 Chevrolet Silverado Code

1. What does OBDII code B101D mean for a 2014 Chevrolet Silverado?

The B101D code for a 2014 Chevrolet Silverado indicates a problem with the Electronic Control Unit (ECU) hardware.

2. What are common symptoms of OBDII code B101D in a 2014 Chevrolet Silverado?

Common symptoms of code B101D in a 2014 Silverado may include engine misfires, rough idling, and issues with vehicle performance.

3. What are possible causes of OBDII code B101D in a 2014 Chevrolet Silverado?

Potential causes of code B101D in a 2014 Silverado include faulty ECU hardware, wiring issues, or a poor connection between the ECU and other components.

4. How can I diagnose OBDII code B101D in my 2014 Chevrolet Silverado?

Diagnosing code B101D typically involves using a diagnostic scanner to retrieve the specific fault codes, inspecting the ECU connections, and testing the ECU for proper functionality.

5. Can I continue driving my 2014 Chevrolet Silverado with OBDII code B101D?

It is not recommended to continue driving your Silverado with an unresolved B101D code, as it may lead to further damage or performance issues.

6. How can I repair OBDII code B101D in my 2014 Chevrolet Silverado?

Repairing code B101D may involve replacing the ECU hardware, repairing any damaged wiring, or ensuring a secure connection between the ECU and other components.

7. Are there any DIY tips for fixing OBDII code B101D in a 2014 Chevrolet Silverado?

While some basic troubleshooting steps can be taken, resolving code B101D often requires specialized tools and knowledge, so it is advisable to consult a professional mechanic.

8. How much does it cost to fix OBDII code B101D in a 2014 Chevrolet Silverado?

The cost of repairing code B101D in a 2014 Silverado can vary depending on the exact cause of the issue, but it may involve ECU replacement, which can range from a few hundred to over a thousand dollars.

9. Can a faulty ECU cause other issues besides triggering OBDII code B101D in a 2014 Chevrolet Silverado?

Yes, a faulty ECU can lead to a variety of problems beyond just triggering a diagnostic trouble code, including affecting engine performance, fuel efficiency, and overall vehicle operation.

10. How can I prevent OBDII code B101D from recurring in my 2014 Chevrolet Silverado?

Regular maintenance, such as ensuring proper ECU connections and addressing any wiring issues promptly, can help prevent the recurrence of code B101D in your 2014 Silverado.