AutoCodes – Chevrolet – B1019 2017 Chevrolet Silverado

B1019 2017 Chevrolet Silverado Code - SDM System Configuration Error

Quick Answer

The Inflatable Restraint Sensing and Diagnostic Module (SDM) monitors the number of safety components installed on the vehicle. Common causes include Program Inflatable Restraint Sensing and Diagnostic Module (SDM), Faulty Inflatable Restraint Sensing and Diagnostic Module, Inflatable Restraint Sensing and Diagnostic Module harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B1019 2017 Chevrolet Silverado indicates SDM System Configuration Error.
Common causes: Common causes include Program Inflatable Restraint Sensing and Diagnostic Module (SDM), Faulty Inflatable Restraint Sensing and Diagnostic Module, Inflatable Restraint Sensing and Diagnostic Module harness is open or shorted.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 337

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Apr 05, 2023

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B1019 2017 Chevrolet Silverado Description

The Inflatable Restraint Sensing and Diagnostic Module (SDM) monitors the number of safety components installed on the vehicle. When the ignition is turned ON, the Inflatable Restraint Sensing and Diagnostic Module evaluates the number of safety components installed and compares it to the number of components the Inflatable Restraint Sensing and Diagnostic Module expects to see on the vehicle with its current calibration. If there is a mismatch between the detected components and the components programmed with the Inflatable Restraint Sensing and Diagnostic Module calibration, Diagnostic Trouble Code (DTC) B1019 will be set. The components (if equipped) that the Inflatable Restraint Sensing and Diagnostic Module will detect include inflatable restraint deployment loops, impact sensors, passenger presence system components, seat position sensors, disable switches, and seat belt switches.

OBDII Code B1019 2017 Chevrolet Silverado - SDM System Configuration Error - AutoCodes.com — B1019 2017 Chevrolet Silverado Code - SDM System Configuration Error

What does this mean?

What are the Possible Causes of the DTC B1019 2017 Chevrolet Silverado?

Program Inflatable Restraint Sensing and Diagnostic Module (SDM)
Faulty Inflatable Restraint Sensing and Diagnostic Module
Inflatable Restraint Sensing and Diagnostic Module harness is open or shorted
Inflatable Restraint Sensing and Diagnostic Module circuit poor electrical connection

How to Fix the DTC B1019 2017 Chevrolet Silverado?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

B1019:3A SDM System Configuration Error Incorrect Component Installed

Diagnostic Trouble Code (DTC) B1019 can be set after the Inflatable Restraint Sensing and Diagnostic Module (SDM) has been replaced and/or reprogrammed before the setup procedure is completed. The setup procedure cannot be completed if DTC B1019 is set as current or history. If a short or open is detected in a deployment circuit prior to the setup procedure being performed, the inflatable restraint sensing and diagnostic module will set DTC B1019.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B1019 2017 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B1019 2017 Chevrolet Silverado code?

Need more information on how to fix the B1019 2017 Chevrolet Silverado code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B1019 2017 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B1019 2017 Chevrolet Silverado Code

1. What is OBDII code B1019 on a 2017 Chevrolet Silverado?

The B1019 code on a 2017 Chevrolet Silverado indicates an SDM (Sensing and Diagnostic Module) System Configuration Error.

2. What are the common symptoms of OBDII code B1019 in a 2017 Chevrolet Silverado?

Common symptoms of B1019 may include the airbag warning light staying illuminated on the dashboard, non-deployment of airbags in case of an accident, or other airbag system malfunctions.

3. What are the possible causes of the SDM System Configuration Error (B1019) in a 2017 Chevrolet Silverado?

Potential causes of B1019 include a faulty SDM module, wiring issues in the airbag system, a disconnected or damaged SDM connector, or issues with other related components.

4. How can I diagnose OBDII code B1019 in my 2017 Chevrolet Silverado?

Diagnosing B1019 typically involves using a diagnostic scanner to retrieve the specific error code, inspecting the airbag system components for any visible damage, and checking the wiring connections for any issues.

5. Can I drive my 2017 Chevrolet Silverado with OBDII code B1019?

It is not recommended to drive your vehicle with an active B1019 code, as it indicates a potential issue with the airbag system that may compromise your safety in case of an accident.

6. How can I repair OBDII code B1019 on a 2017 Chevrolet Silverado?

Repairing B1019 may involve resetting the error code with a diagnostic scanner, checking and repairing any damaged wiring or connectors in the airbag system, or replacing the SDM module if necessary.

7. Is it safe to reset OBDII code B1019 in a 2017 Chevrolet Silverado?

While resetting the B1019 code may temporarily turn off the warning light, it is important to diagnose and address the underlying issue causing the error to ensure the proper functioning of the airbag system.

8. How much does it cost to repair OBDII code B1019 in a 2017 Chevrolet Silverado?

The cost of repairing B1019 can vary depending on the specific issue causing the error, the labor rates of the repair shop, and the cost of any parts that may need replacement. It's recommended to get a diagnosis and estimate from a qualified mechanic.

9. Can a DIY enthusiast fix OBDII code B1019 on a 2017 Chevrolet Silverado?

While some basic troubleshooting steps can be taken by a DIY enthusiast, diagnosing and repairing the root cause of B1019, especially in the airbag system, may require specialized tools and expertise best handled by a professional mechanic.

10. How urgent is it to address OBDII code B1019 in a 2017 Chevrolet Silverado?

Addressing OBDII code B1019 promptly is crucial to ensure the proper functioning of the airbag system, which plays a vital role in occupant safety during a collision. Ignoring the issue may pose a risk in case of an accident.