AutoCodes – Chevrolet – B1019 2014 Chevrolet Silverado

B1019 2014 Chevrolet Silverado Code - SDM System Configuration Error

Quick Answer

The Inflatable Restraint Sensing and Diagnostic Module (SDM) monitors the number of safety components installed on the vehicle. Common causes include Program Inflatable Restraint Sensing and Diagnostic Module (SDM), Faulty Inflatable Restraint Sensing and Diagnostic Module, Inflatable Restraint Sensing and Diagnostic Module harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B1019 2014 Chevrolet Silverado indicates SDM System Configuration Error.
Common causes: Common causes include Program Inflatable Restraint Sensing and Diagnostic Module (SDM), Faulty Inflatable Restraint Sensing and Diagnostic Module, Inflatable Restraint Sensing and Diagnostic Module harness is open or shorted.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 334

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Apr 05, 2023

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B1019 2014 Chevrolet Silverado Description

The Inflatable Restraint Sensing and Diagnostic Module (SDM) monitors the number of safety components installed on the vehicle. When the ignition is turned ON, the Inflatable Restraint Sensing and Diagnostic Module evaluates the number of safety components installed and compares it to the number of components the Inflatable Restraint Sensing and Diagnostic Module expects to see on the vehicle with its current calibration. If there is a mismatch between the detected components and the components programmed with the Inflatable Restraint Sensing and Diagnostic Module calibration, Diagnostic Trouble Code (DTC) B1019 will be set. The components (if equipped) that the Inflatable Restraint Sensing and Diagnostic Module will detect include inflatable restraint deployment loops, impact sensors, passenger presence system components, seat position sensors, disable switches, and seat belt switches.

OBDII Code B1019 2014 Chevrolet Silverado - SDM System Configuration Error - AutoCodes.com — B1019 2014 Chevrolet Silverado Code - SDM System Configuration Error

What does this mean?

What are the Possible Causes of the DTC B1019 2014 Chevrolet Silverado?

Program Inflatable Restraint Sensing and Diagnostic Module (SDM)
Faulty Inflatable Restraint Sensing and Diagnostic Module
Inflatable Restraint Sensing and Diagnostic Module harness is open or shorted
Inflatable Restraint Sensing and Diagnostic Module circuit poor electrical connection

How to Fix the DTC B1019 2014 Chevrolet Silverado?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

B1019:3A SDM System Configuration Error Incorrect Component Installed

Diagnostic Trouble Code (DTC) B1019 can be set after the Inflatable Restraint Sensing and Diagnostic Module (SDM) has been replaced and/or reprogrammed before the setup procedure is completed. The setup procedure cannot be completed if DTC B1019 is set as current or history. If a short or open is detected in a deployment circuit prior to the setup procedure being performed, the inflatable restraint sensing and diagnostic module will set DTC B1019.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B1019 2014 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B1019 2014 Chevrolet Silverado code?

Need more information on how to fix the B1019 2014 Chevrolet Silverado code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B1019 2014 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B1019 2014 Chevrolet Silverado Code

1. What does OBDII code B1019 mean on a 2014 Chevrolet Silverado?

The B1019 code indicates an SDM (Sensing and Diagnostic Module) System Configuration Error in your vehicle.

2. What are the common symptoms of a B1019 code on a 2014 Chevrolet Silverado?

Common symptoms of the B1019 code may include the airbag warning light illuminating on the dashboard and potential issues with the airbag system.

3. What are possible causes of the B1019 code on a 2014 Chevrolet Silverado?

Possible causes of the B1019 code include a faulty SDM module, wiring issues, or a software malfunction in the airbag system.

4. How serious is a B1019 fault code on a 2014 Chevrolet Silverado?

A B1019 code should be taken seriously as it indicates a potential problem with the vehicle's airbag system, which is crucial for passenger safety in the event of a collision.

5. Can I continue driving my 2014 Chevrolet Silverado with a B1019 code?

It is not recommended to drive the vehicle with a B1019 code present, as it may compromise the functionality of the airbag system in case of an accident.

6. How can I diagnose and repair a B1019 code on my 2014 Chevrolet Silverado?

Diagnosing and repairing a B1019 code typically involves using a diagnostic scanner to retrieve the specific error codes, checking the wiring connections, and potentially replacing the SDM module if necessary.

7. Is it safe to reset the B1019 code on a 2014 Chevrolet Silverado?

While you can reset the code temporarily, it is essential to diagnose and address the underlying issue causing the B1019 code to ensure the proper functioning of the airbag system.

8. Can a DIY enthusiast fix a B1019 code on a 2014 Chevrolet Silverado?

Depending on your level of automotive knowledge and experience, you may be able to address the B1019 code yourself by following repair guides or seeking assistance from online forums.

9. How much does it typically cost to repair a B1019 code on a 2014 Chevrolet Silverado?

The cost of repairing a B1019 code can vary depending on the specific cause of the issue, with potential expenses including parts replacement and labor costs from a mechanic.

10. Will a B1019 code on a 2014 Chevrolet Silverado affect the vehicle's performance?

While the B1019 code may not directly impact the vehicle's performance, it is crucial to address the underlying airbag system issue to ensure passenger safety and compliance with safety regulations.