B1017 CADILLAC - Output Driver Module Performance
B1017 CADILLAC Possible Causes
- Faulty Driver Door Unlock Relay
- Driver Door Unlock Relay harness is open or shorted
- Driver Door Unlock Relay circuit poor electrical connection
- Faulty Body Control Module (BCM)
How do I fix code B1017 CADILLACCheck the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.
Cost of diagnosing the B1017 CADILLAC code
Labor: 1.0The cost of diagnosing the B1017 CADILLAC code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle's make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
- Engine Light ON (or Service Engine Soon Warning Light)
B1017 Cadillac DescriptionThe Body Control Module (BCM) internally grounds the driver door unlock relay control circuit for the driver door unlock relay when it receives an unlock switch signal from either door lock switch. When the BCM grounds the driver door unlock relay control circuit the driver door unlock relay is energized and unlocks the driver door. The Diagnostic Trouble Code (DTC) will set if the driver door unlock relay control circuit is shorted to ground or open for more then one second.
B1017 CADILLAC More InformationNeed more information on how to fix the B1017 CADILLAC code?
Get Access to Factory Service Manuals
Need more help?Get the B1017 Cadillac code diagnosed by a professional: Find a repair shop in your area
CommentsHelp us improve AutoCodes.com. Leave a comment below or tell us if the information above help you fix the code. What are the symptoms on your vehicle for the B1017 Cadillac code? Have you replaced any parts?
Any information is appreciated. Thanks