B1015 2017 GMC Sierra Code - Vehicle Identification Number Information
Quick Answer
When the ignition is turned ON, the Control Module receives the Vehicle Identification Number (VIN) from the Body Control Module (BCM). Common causes include Faulty Parking Assist Control Module (For vehicles with Parking Assist System), Faulty Active Safety Control Module (For vehicles with Driver Assistance Systems), Control Module harness is open or shorted. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
- What it means
- B1015 2017 GMC Sierra indicates Vehicle Identification Number Information.
- Common causes
- Common causes include Faulty Parking Assist Control Module (For vehicles with Parking Assist System), Faulty Active Safety Control Module (For vehicles with Driver Assistance Systems), Control Module harness is open or shorted.
- Severity
- Moderate - service should be scheduled soon.
- Can I drive?
- The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
Code B1015 2017 GMC Sierra Description
What are the Possible Causes of the DTC B1015 2017 GMC Sierra?
- Faulty Parking Assist Control Module (For vehicles with Parking Assist System)
- Faulty Active Safety Control Module (For vehicles with Driver Assistance Systems)
- Control Module harness is open or shorted
- Control Module circuit poor electrical connection
How to Fix the DTC B1015 2017 GMC Sierra?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B1015 2017 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B1015 2017 GMC Sierra code?
Need more information on how to fix the B1015 2017 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1015 2017 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B1015 2017 GMC Sierra Code
1. What does OBDII code B1015 mean on a 2017 GMC Sierra?
Code B1015 indicates an issue with the Vehicle Identification Number (VIN) information stored in one or more control modules.
2. What are the common symptoms of code B1015 on a 2017 GMC Sierra?
Common symptoms include the check engine light or other warning lights, issues with module communication, or vehicle features not functioning correctly.
3. What causes code B1015 on a 2017 GMC Sierra?
This code is typically caused by a mismatch or corruption in the VIN data stored in the vehicle’s control module, or by a recently replaced module that hasn’t been properly programmed.
4. Can a faulty module trigger code B1015 on a 2017 GMC Sierra?
Yes, a faulty or improperly programmed module can fail to store or verify the correct VIN, triggering this code.
5. How do I fix code B1015 on a 2017 GMC Sierra?
Repairs may involve reprogramming or reinitializing the affected control module using a GM-approved scan tool to correctly load the VIN information.
6. Can I drive my 2017 GMC Sierra with code B1015 active?
While the vehicle may still operate, certain features or safety systems could be compromised, so it’s best to address the issue promptly.
7. Does replacing a control module always cause code B1015 in a 2017 GMC Sierra?
Not always, but if the new module isn’t programmed with the correct VIN, the code will likely appear.
8. What tools are needed to resolve code B1015 on a 2017 GMC Sierra?
A GM-approved scan tool or equivalent diagnostic equipment is needed to access and reprogram the module with the correct VIN.
9. Is code B1015 a serious issue for a 2017 GMC Sierra?
It can be serious if it affects critical systems like airbags or engine operation, so it should be diagnosed and repaired as soon as possible.
10. Can disconnecting the battery clear code B1015 on a 2017 GMC Sierra?
No, disconnecting the battery won’t resolve this issue because it requires reprogramming the VIN in the control module.
Discuss the causes and fixes for B1015 2017 GMC Sierra OBDII Code
Code B1015 2017 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
