B1009 CADILLAC - EEPROM Cchecksum Error
B1009 CADILLAC Possible Causes
- Faulty Control Module
- Control Module harness is open or shorted
- Control Module circuit poor electrical connection
How do I fix code B1009 CADILLAC?Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.
Cost of diagnosing the B1009 CADILLAC code
Labor: 1.0The cost of diagnosing the B1009 CADILLAC code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle's make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
- Engine Light ON (or Service Engine Soon Warning Light)
B1009 CADILLAC DescriptionEEPROM checksum error detection is internal. No external circuits are involved. For DTC to set, the microprocessor must run the program to detect a checksum error after each power up. The only requirements are voltage and ground. The program runs even if the voltage is out of operating range.
Microprocessor retains an inverse copy of digital value stored in certain blocks of memory in EEPROM. The microprocessor then reads information from those blocks and adds stored inverse value to current value. If they do not equal 0, the microprocessor sets DTC B1009.
When DTC is set, microprocessor reverts to base operation values programmed for those blocks of data that have failed checksum test. Blocks of data that have not failed the checksum test are not affected. DTC clears when microprocessor runs a successful checksum test of EEPROM.
More InformationNeed more information on how to fix the B1009 CADILLAC code?
Get Access to Factory Service Manuals
Need more help?Get the B1009 Cadillac code diagnosed by a professional: Find a repair shop in your area
CommentsHelp us improve AutoCodes.com. Leave a comment below or tell us if the information above help you fix the code. What are the symptoms on your vehicle for the B1009 Cadillac code? Have you replaced any parts?
Any information is appreciated. Thanks